Trigger out 1 / trigger out 2, Front display, P. 272) – Denon AVR-A1H 15.4-Channel Network A/V Receiver User Manual
Page 272
Trigger Out 1 / Trigger Out 2
Select the conditions for activating trigger out.
For details about how to connect the TRIGGER OUT jacks, see
n
When setting for zone (MAIN ZONE
/
ZONE2
/
ZONE3)
Trigger out is activated through linkage to the power of the zone set to
“On”.
n
When setting for input source
Activate trigger out when the input source set to “On” is selected.
n
When setting for HDMI monitor
Activate trigger out when the HDMI monitor set to “On” is selected.
On:
Activate trigger on this mode.
– – –:
Do not activate trigger on this mode.
Front Display
Makes settings related to the display on this unit.
o
Brightness
Adjust the display brightness of this unit.
Bright
(Default):
Normal display brightness.
Dim:
Reduced display brightness.
Dark:
Very low display brightness.
Off:
Turns the display off.
0
You can also adjust the display by pressing DIMMER on the main unit.
272