Fujitsu Ricoh Fujitsu fi-7900 Image Scanner - Manual (Page 145)

Replacing the Pick Roller
Replace the pick roller in following procedure.
HINT
There are two pick rollers. Make sure to replace both units.
1 Turn off the scanner, unplug the power cable and wait for at least 15 minutes.
For details, refer to
How to Turn the Power OFF (page 22) .
2 Remove all documents from the stacker.
3 Open the ADF.
For details, refer to
How to Open the ADF (page 27) .
CAUTION
When the ADF is open, it might close accidentally. Be careful not to get
your fingers caught.
4 Remove the pick rollers (× 2) from the scanner.
a Open the roller cover.
Grab the tabs on the left and right side with your fingers and pull down the cover
towards you.
Replacing the Consumables
145