Fujitsu Ricoh Fujitsu fi-7900 Image Scanner User Manual
Page 86
●
The scanner determines that the condition of the roller has exceeded the threshold that can be
corrected, by monitoring the wear on the roller. (For assist roller counter)
●
The page count after cleaning reaches the value configured in
in the Software Operation Panel. (Cleaning counter)
●
The amount of remaining ink reaches below 33%. This is only displayed when the imprinter is
installed. (For [Ink Level:Front] / [Ink Level:Back])
HINT
The total number of sheets scanned is displayed in total count. Total count cannot be reset.
5
After replacing the consumables or cleaning, select the highlighted counter with the [ ] or [ ]
button, and press the [Counter Reset] button.
A message appears to confirm that you want to clear the counter.
ATTENTION
The assist roller counter cannot be cleared.
It requires a service engineer to clear the counter.
For details, contact a service engineer. Refer to the contact information in the Contact List or
the Contact for Inquiries section in Safety Precautions bundled with this product and make an
inquiry.
6
Select [1: Yes] by the [ ] or [ ] button, and press the [Function/Enter] button to confirm.
The counter value will be reset to 0.
For ink level, the value will be set to 100.
How to Use the Operator Panel
86