Kodak Alaris E1030 Scanner (30 ppm) - Manual (Page 21)

A-61997 1 August 2022 13
3 Scanning
3 Scanning
Basic scanning
Scanner controls
The cover of the E1030/40 Series
Scanners contains a 1.5” function
window and five buttons.
Function window
If you installed a Kodak scanning
application, the function window
displays 1-9. These numbers correspond
to predefined functions. See “Scanning
functions” on page 16.
U or E is displayed if an error occurs.
Buttons
The power button is always active and is used to turn the scanner
on and off.
The Up and Down Scroll buttons allow you to select or
scroll through predefined functions by pressing the Up or Down
buttons.
The Play button initiates the scanning function.
The X button will stop or pause the scanning function:
• press once to temporarily pause scanning (press the play button
to resume scanning)
• press twice to stop scanning
The button can also be used to clear
some types of flashing codes.
NOTE: Throughout this chapter, the , , and button
illustrations represent the buttons on your scanner.