Kodak Alaris E1030 Scanner (30 ppm) - Manual (Page 38)

30 A-61997 1 August 2022
4 Maintenance
5. Inspect the separation roller.
If the separation roller tires show signs of wear or damage, replace
the separation roller assembly. See “Replacement procedures” on
page 33 for more information.
6. Reinstall the separation roller by aligning the tab with the slot and
snapping it into position.
7. Reinstall the pre-separation pad by aligning the slots with the holes
on the pre-separation pad and snapping it into place.
8. Close the scanner cover.