Mixed paper, Lightweight paper, Ncr paper – Kodak Alaris E1030 Scanner (30 ppm) User Manual
Page 27: Scanning small items
A-61997 1 August 2022
19
3 Scanning
E1030:
E1040:
Mixed paper
In addition to the tips in .“Preparing documents for scanning” on
page 17, try to stack the input paper so it is centered, side to side, in the
input tray. Lead edges should align or be feathered.
Lightweight paper
Straighten the stack of input paper, then fan pages, before placing them
in the feeder, lead edge first.
Do not push lightweight paper too far into the input tray. The scanner
needs to detect the pages, but pushing too far may crumple delicate
paper.
NCR paper
“No carbon required” (NCR) paper is coated with chemicals that affect
the scanner rollers and can degrade scanner feeding performance.
After scanning NCR paper you should clean the scanner. See
“Cleaning procedures” on page 27.
Scanning small items
If you are scanning small items such as a driver’s license or credit card
— especially hard cards that are relatively thick — they should be
scanned with the embossed side up and ideally one at a time. You may
need to assist them by hand.
One card may be scanned first in a batch with larger pages.
Feed hard cards in landscape orientation.