Epson EM07ZS1647F - Manual (Page 55)

2. Installation
(6) Allow the default components to be installed.
(7) Select the protocol: PROFIBUS DP you will be using.
If you also use DeviceNet, select DeviceNet as well. Select which type of device
data files to install (GSD for PROFIBUS DP, EDS for DeviceNet).
(8) Complete the installation.
(9) The message to ensure the restart appears. Click the Yes button.
(10) Start the C:\Install\FieldBus\Install\SP\Setup.EXE and install the service pack.
No installation is necessary when a service pack is not attached to controller.
(11) After completing the installation of the service pack, shutdown the computer.
(12) Proceed to 2.6.4 Board Installation.
Fieldbus I/O Rev.6 43