Epson 811p - Manual (Page 101)

B
Appendix B: Notices 95
B
Appendix B: Notices
T
his chapter includes safety instructions and other important information
about your EPSON PowerLite projector.
Important Safety Instructions
Follow these safety instructions when setting up and using the projector:
■ Do not place the projector on an unstable cart, stand, or table.
■ Do not use the projector near water or sources of heat.
■ Use the type of power source indicated on the projector. If you are not
sure of the power available, consult your dealer or power company.
■ Place the projector near a wall outlet where the plug can be easily
unplugged.
Placez l’appareil près d’une prise de courant où la fiche peut être débranchée
facilement.
■ Insert the projector’s three-wire grounding-type plug into a properly
grounded outlet. If you have a two-prong outlet, contact an electrician
to replace it. Do not hold the plug with wet hands.
■ Take the following precautions for the plug. Failure to comply with
these precautions could result in sparks or fire: Do not insert the plug
into an outlet with dust present. Insert the plug firmly into the outlet.
■ Do not overload wall outlets, extension cords, or integral convenience
receptacles. This can cause fire or electric shock.
■ Do not place the projector where the cord can be walked on. This may
result in fraying or damage to the plug.
■ Unplug the projector from the wall outlet before cleaning. Use a damp
cloth for cleaning. Do not use liquid or aerosol cleaners.
■ Do not block the slots and openings in the projector case. They provide
ventilation and prevent the projector from overheating. Do not operate
the projector on a sofa, rug, or other soft surface, or in a closed-in
cabinet unless proper ventilation is provided.
600-811-820.book Page 95 Tuesday, April 30, 2002 10:17 AM