Epson 811p - Manual (Page 30)

24 Using the Projector
If you're using Macintosh OS X:
You may need to set up your system to display on the projector screen
as well as the LCD screen. Follow these steps:
1. From the Apple menu, select System Preferences , then select
Displays .
2. Make sure the VGA Display dialog box is selected.
3. Click the Arrange tab.
4. Make sure the Mirror Displays checkbox is selected.
Adjusting the Image
Once you see your image, you’ll need to make certain adjustments:
■ To focus or zoom your image, see below.
■ If the image is too high or too low, you can reposition it. See
page 26.
■ If the image isn’t square, see page 27.
■ If only part of a computer image is displayed, you may need to
press the
Resize button. See page 28 for more information.
■ If the projected image is flickering or “noisy,” see page 28.
Select the
VGA Display
dialog box
Make sure
Mirror Displays
is checked
600-811-820.book Page 24 Tuesday, April 30, 2002 10:17 AM