Epson 811p - Manual (Page 63)

Fine-tuning the Projector 57
Setting Advanced Features
You can use the Advanced menu to configure the projector for rear
projection or ceiling mounting, and adjust several other features.
1. Press the Menu button.
2. Use the Sync– button (control panel) or the button
(remote control) to highlight Advanced . You see the features and
their settings on the right side:
3. Press to select the Advanced menu.
4. Use the Tracking and Sync buttons (control panel) or
the button (remote control) to set the following options:
■ Language
Select from 9 languages to be used for the projector menus.
■ Startup Screen
Turn on to display your captured image or logo whenever the
projector starts. (See page 53 for more information.)
■ Color Adjustment
Adjusts the color temperature of the projected image. Select
Color Temp. to set a temperature between 5000 and
10000 K. Select RGB to adjust individual red, green, and
blue values, as shown. (Not available if sRGB is selected as
the Color Mode setting in the Video menu. See page 49 for
more information.)
■ Rear Proj.
Turn on to project from behind onto a transparent screen.
600-811-820.book Page 57 Tuesday, April 30, 2002 10:17 AM