Epson 811p - Manual (Page 37)

Using the Projector 31
3. Press the Power button again. The power light flashes orange for
about a minute and a half as the projector cools down. When the
projector has cooled, the orange light stays on and the exhaust fan
shuts off.
If you want to turn the projector on again, wait until the orange
light stops flashing. Then press the
Power button.
4. If you extended the front foot, press the foot adjust button to
retract it.
5. Replace the lens cap and unplug the power cord.
6. If you’re using a VCR or other video source, turn it off after you
turn off the projector.
7. Disconnect all equipment, and store the projector in a protective
case.
caution
To avoid damaging the
projector or lamp, never
unplug the power cord when
the power light is green or
flashing orange.
600-811-820.book Page 31 Tuesday, April 30, 2002 10:17 AM