Epson 811p - Manual (Page 59)

Fine-tuning the Projector 53
Creating Your Own Startup Screen
You can transfer any image from your computer or video source to the
projector, and then use it as your startup screen. You can also use it as
the screen displayed when the projector is not receiving a signal or
when you press the
A/V Mute button. The image can be a company
logo, slogan, photograph, or any other image you want to use.
Capturing the Image
Start by displaying the image you want to use. It can be an image from
either a computer or video source such as a DVD player or digital
camera. Then follow these steps to capture the image and transfer it to
the projector:
1. Press the Menu button on the control panel or remote control.
You see the menu screen.
2. Use the Sync– button (control panel) or the button
(remote control) to highlight the User’s Logo menu, then
press .
3. When you see the screen shown at right, select Yes and press .
A selection box displays over the image.
4. Use the Tracking and Sync buttons (control panel) or the
button (remote control) to select the area of the image you want
to use. Then press .
600-811-820.book Page 53 Tuesday, April 30, 2002 10:17 AM