Epson 811p User Manual
Page 78
72
Solving Problems
Refer to the following table for a complete description of the
projector’s status lights and their meaning:
Status lights
Light
Status
Description
orange
The projector is in sleep mode. You can unplug it or press the Power
button to turn it on.
flashing green
The projector is warming up. Wait for the image to appear.
green
The projector is operating normally.
flashing orange
The projector is cooling down. You can’t turn it back on (and you should
not unplug it) until the light stops flashing and remains orange.
flashing red
Power is cut off because of an internal problem. Remove the power cord
and contact EPSON for help.
red
The lamp is burned out. Replace it as described on page 64.
flashing orange
The lamp is almost burned out. Make sure you have a replacement lamp
ready.
flashing red
There is a problem with the lamp, power supply, fan, or circuit. If
necessary, replace the lamp as described on page 64.
flashing orange
The projector is too hot. Make sure the temperature surrounding the
projector does not exceed 95
°
F (35
°
C) and there is plenty of space
around and under the projector for ventilation.
The air filter may be clogged. Clean or replace it as described on page 63.
red
The projector is overheating, which turns the lamp off automatically. Wait
until the cooling fan stops, then unplug the power cord. Plug the power
cord back in and press the
Power
button. Make sure the room
temperature is not above 95 °F (35 °C) and there is plenty of space
around and under the projector for ventilation.
The air filter may be clogged. Clean or replace it as described on page 63.
If the projector continues to overheat after you clean the air filter, the
problem may be caused by damage to the cooling fan or temperature
sensor. Contact EPSON for help.
Warning: Except as specifically explained in this User’s Guide, do not
attempt to service this product yourself.
flashing red
There is a problem with the cooling fan or temperature sensor. Turn off
the projector and unplug it. Contact EPSON for help.
600-811-820.book Page 72 Tuesday, April 30, 2002 10:17 AM