Epson 811p - Manual (Page 90)

84 Appendix A: Connecting to Additional Equipment
Connecting to a PC Desktop Computer
You can connect the projector to any IBM-compatible PC. This
section includes instructions for the following:
■ Connecting the computer cable
■ Connecting the mouse cable (if you want to use the remote
control as a mouse or use USB audio)
■ Connecting the audio cable (if you’ll be projecting with audio)
Follow the steps in each section for the cables you need to connect.
Before beginning, make sure the projector and computer are turned
off. If you need help with positioning the projector, see page 10.
Connecting the Computer Cable
1. Disconnect the monitor cable from the video port on the back of
the computer.
2. If you’ll be viewing the display on your computer monitor as well
as the projector screen, connect the monitor cable to the
projector’s
Monitor Ou t port, as shown.
Monitor
Out port
600-811-820.book Page 84 Tuesday, April 30, 2002 10:17 AM