Epson 811p - Manual (Page 42)

36 Using the Remote Control
Adjusting the Volume
If you’ve connected an audio source to the projector, you can adjust
the sound that’s output through the projector’s speakers.
■ To increase the volume, press on the right side of the Volume
button.
■ To reduce the volume, press on the left side of the Volume
button.
Turning Off the Picture and Sound
You can use the A/V Mute button on the remote control to turn off
the image and sound and darken your screen. This is useful if you
want to temporarily re-direct your audience’s attention without the
distraction of a bright screen.
■ To turn off the picture, press the A/V Mute button. The screen
goes dark.
■ To turn the image back on, press the button again.
You can also have an image, such as a company logo, display on the
screen whenever you press the
A/V Mute button. See page 53 for
instructions.
Stopping Action
You can use the remote control to stop the action in your video or
computer image.
■ Press the Freeze button to stop the action and keep the current
image on the screen. The sound will continue.
■ Press the Freeze button again to re-start it.
Power
A/V Mute Freeze
E-Zoom
Power
A/V Mute Freeze
E-Zoom
600-811-820.book Page 36 Tuesday, April 30, 2002 10:17 AM