Specifications e, Appendix e, Specifications – Honeywell HRHD 410 User Manual
Page 117: Table e-1, Technical specifications, Appendix e, specifications
Specifications
Rev 3.01
99
Document 900.0315
10/05
E
Specifications
Table E-1
Technical Specifications
Video
Signal Format:
NTSC or PAL (auto detect)
Video Input:
Composite: 4 looping inputs, 1 Vp-p,
auto-terminating, 75 Ohms
Monitor Outputs:
Composite: One (BNC), 1 Vp-p, 75 Ohms,
SVHS: One (Y/C),
Analog RGB: One (VGA)
- NTSC: 30.8 kHz (horizontal frequency)/60 Hz
(vertical frequency)
- PAL: 30.8 kHz (horizontal frequency)/50 Hz (vertical
frequency)
Video Resolution:
720 x 480 (NTSC)
720 x 576 (PAL)
Playback/Record Speed
(images per second):
Standard Resolution:
120 ips (NTSC), 100 ips (PAL)
High Resolution:
60 ips (NTSC), 50 ips (PAL)
Inputs/Outputs
Alarm Input:
4 TTL, programmable as NC/NO, 4.3V threshold
Alarm Output:
2 relay out, terminal block, NC & NO, 0.5A @
125VAC, 1A @ 30VDC
Alarm Reset Input:
1 TTL, terminal block
Internal Buzzer:
80 db at 10 cm
Network Connectivity:
10/100 Base Ethernet, RS232C for external modem
Audio Input:
4 lines in
Audio Output:
1 line out