Modem setup, Figure 3-51, Modem setup screen – Honeywell HRHD 410 User Manual
Page 82: For details on
Configuration
Rev 3.01
64
Document 900.0315
10/05
Modem Setup
Use the Modem Setup screen to configure your modem.
Figure 3-51
Modem Setup Screen
The Use field displays the available modem type: External Modem.
1.
Highlight the box beside Baud Rate of the RS232 field and then press # . A list of
baud rates ranging from 300 to 115,200 displays.
2.
Highlight the box beside Data Bit of the RS232 field. Press # to toggle between 7
bit and 8 bit formats.
3.
Highlight the box beside Stop Bit of the RS232 field. Press # to toggle between 1
and 2 Stop Bits.
4.
Highlight the box beside Parity of the RS232 field and then press # . A drop-down
list displays. You can select from None, Odd, or Even parity.
5.
To save your changes, highlight OK and then press # . Select Cancel to exit the
screen without saving the changes.