Honeywell HRHD 410 - Manual (Page 39)

Configuration
Rev 3.01 21 Document 900.0315
10/05
Initial Unit Setup
Before using your DVR for the first time, you should establish the initial settings. This
includes items such as time and date, display language, camera, audio, remote control,
record mode, network and password. Your DVR can be set up using various screens
and dialog boxes.
1. Press MENU to enter the setup screens. The Admin Password screen displays.
Figure 3-2 Admin Password Screen
2. Enter the password by pressing the appropriate combination of Camera buttons
and then ENTER (# ). The factory default password is 4321. There are two Setup
screens: Quick Setup and Normal Setup. The factory default is the Quick Setup
screen.
Quick Setup Screen
Figure 3-3 Quick Setup Screen