Honeywell HRHD 410 - Manual (Page 67)

Configuration
Rev 3.01 49 Document 900.0315
10/05
Event Action Setup
You can program the DVR to record, activate the alarm output, and/or notify the remote
site whenever sensor, motion, text, or video loss events are detected. To access the
Event Action screens, highlight the Alarm-In Action, Motion Action, Text-In Action, or
Video Loss Action in the Event Action menu (MENU
➤ Event Action). The following
Event Action setup screens display.
Alarm In Event Action (Record) Setup Screen
The DVR can be set to react to events differently. Each sensor can be assigned a
schedule, camera, recording speed, video quality, and dwell time.
Figure 3-32 Alarm In Event Action Screen
1. Highlight the Sched box and then press # . A schedule screen displays. Set the
schedule as described earlier, under
Time-Lapse Recording Schedule , page 47 .
2. Highlight the Camera box and then press # . A camera selection screen displays.
Select the camera number you would like to associate with the sensor (Alarm
Input).
Note You can associate multiple cameras with a sensor (Alarm Input).
3. Highlight the Speed box and select number of images per second you would like
to record from the drop-down list.
4. Highlight the Quality box and select the image quality you want to record from the
drop-down list.
5. Highlight the Dwell Time box and set the length of time you would like to record
for the associated event.