Figure 3-50, Lan (adsl) setup screen, Lan — adsl (pppoe) – Honeywell HRHD 410 User Manual

Page 81

Advertising
background image

Configuration

Rev 3.01

63

Document 900.0315

10/05

LAN — ADSL (PPPoE)

Select ADSL (PPPoE) from the Type box on the LAN Setup screen to set up the ADSL
network.

Figure 3-50

LAN (ADSL) Setup Screen

1.

Highlight the box beside ID and then press # .to display a virtual keyboard. Enter
the ID for an ADSL connection.

2.

Highlight the box beside Password and then press # .to use the virtual keyboard
to enter the password for an ADSL connection.

Note

Entering the ID and Password and highlighting OK reads the
current IP Address of the DVR configured by the ADSL network.

Note

If the DVR is configured for DHCP or an ADSL network, the IP
Address of the DVR might change whenever the unit is turned
on.

Advertising