Honeywell HRHD 410 - Manual (Page 61)

Configuration
Rev 3.01 43 Document 900.0315
10/05
Note If networking is configured by the external modem, Text-In
cannot be set for the RS232 field. In the Network Setup screen,
set up the DVR for LAN communications first (see
Network Setup
Screen , page 59 ).
Configuring Recording Settings
Note When the DVR is recording video, the REC LED on the front
panel is lit and a red dot appears on the monitor.
Your DVR offers a variety of flexible recording modes:
• You can set it up to record all the time or to only record events.
• It can be set up to continue recording after the hard disk drive is full by recording
over the oldest video.
• You can set it up to alert you when the hard disk is full and stop recording.