Home Dynamix HP-51M - Manual (Page 11)

DYNAMIX HP-51M Coax MDU Master Bridge User’s Guide
5
3
C C
ONFIGURATION ONFIGURATION
This chapter describes the configuration procedure for your bridge.
Configuration Methods
To access and configure your bridge, choose one of the following methods:
♦ Use Web Browser
♦ Use Telnet Program
♦ Use SNMP Manager or MIB Browser
Use Web Browser
Web browser is the easiest tool to configure the bridge. The factory default IP address of HP-51M is ‘192.168.1.1’
and the default subnet mask is ‘255.255.255.0’. To access the bridge with default IP, your PC should be within the
same IP network as the bridge HP-51M. That is, your PC's IP address should be as "192.168.1.xxx". For instance,
you may connect your PC with the bridge directly by one Ethernet cable between your PC's Ethernet adapter and
bridge's port LAN1. Also configures your PC's TCP/IP setting to fixed IP as "192.168.1.xxx", subnet mask as
"255.255.255.0", disable DHCP option. Make your PC and the bridge within the same "192.168.1.xxx" network.
Type in
192.168.1.1 in your browser’s website navigating field, as the following,
The bridge will prompt you a window for password authorization. The factory default Username is ‘ admin ’, also
Password is ‘ admin ’. Please change it to a more secured password after you login successfully. Here shows the
main configuration menus on the browser,