Home Dynamix HP-51M - Manual (Page 28)

DYNAMIX HP-51M Coax MDU Master Bridge User’s Guide
22
Specify that if the built-in Telnet server, Web server, and Snmp agent is enabled or not and assign the port number
for the service.
System Log
By designating the Syslog server IP on HP-51M, HP-51M will emit Unix-like Syslog events toward each server.
Please refer RFC-3164 for Syslog ‘Severity’, used to denote the log level – digit ‘0’ to ‘7’ for different severity
level:
0: EMERGENCY – log only severe events
1: ALERT
2: CRITICAL
3: ERROR
4: WARNING
5: NOTICE
6: INFO
7: DEBUG – log everything
For example, HP-51M will emit only ‘EMERGENCY’ event to Server with IP address ‘192.168.1.111’ according to
the following setting.
System Time
In order to provide correct timestamp for Syslog event, HP-51M supports SNTP protocol and you may assign the
suitable SNTP servers to HP-51M.