Home Dynamix HP-51M - Manual (Page 9)

DYNAMIX HP-51M Coax MDU Master Bridge User’s Guide
3
Connecting the Cables
To establish a new coax networking system by HP-51M, reroute the CATV/Antenna signal source over coax toward
HP-51M ‘TV/Antenna’ port and connect HP-51M ‘HCNA’ port to the original coax entrance to building. HP-51M
works as a Combiner for TV and HCNA signal. In each Dwelling Unit, use the HCNA EP to extract the TV signal
and Ethernet packets. See
Figure 2 for the detail cabling in one MDU,
Figure 2: Detail cabling of HP-51M
HP-51S
Splitter
Tap
M/
C
Optical
Fiber
IS
P
VHF/UH
F Satellite/CAT
V
HP-51M