Home Dynamix HP-51M - Manual (Page 48)

DYNAMIX HP-51M Coax MDU Master Bridge User’s Guide
42
A
S S
PECI PECI FICATIONS FICATIONS
N
E T W O R K
I
N T E R F A C E
 HomePNA3.1 over Coax(HCNA) Compliant
 IEEE 802.3u 100Mbps Fast Ethernet
 IEEE 802.3 10Mbps Ethernet
 IEEE 802.3x Flow Control
 10/100Mbps Auto-Negotiation Support
 MDI/MDX Auto-Detection Support
N
E T W O R K
M
A N A G E M E N T
 Remote Management by HTTP / TELNET / SNMP Protocols
 Firmware and HCNA Driver are Upgradeable via HTTP or TFTP
 Enable/Disable Endpoint Service
 Subscriber Host (PC) Number Control in Endpoint
 Diagnosis of HCNA Interface
 Bandwidth Control
 802.1Q Tag VLAN Support
 IGMP v2 Snooping Control
 Ethernet Statistics and Status
Q
U A L I T Y O F
S
E R V I C E
 Priority Based on 802.1p, IP TOS and TCP/UDP Port
 Based on HomePNA Parameterized QoS
T
R A N M I S S I O N
P
O W E R A N D
S
P E C T R U M
 8 +/- 1dBm
 12~28MHz
T
R A N M I S S I O N
S
P E E D A N D
R
A N G E
 Up to 144Mbps
 Min Attenuation to Endpoint: 12dB