Home Dynamix HP-51M - Manual (Page 30)

DYNAMIX HP-51M Coax MDU Master Bridge User’s Guide
24
Activate Firmware
To do the real upgrade for ‘Bootcode’ or ‘System Firmware’, make the previous uploaded image functional. Refer
the following “
Example to Upload then Activate System Firmware and HCNA Driver ” for more details.
Backup/Restore Configuration
Use to backup current configuration into a file with filename extension ‘.shc’. Or to restore the HP-51M
configuration form the previous saved file.
Example to Upload then Activate System Firmware and HCNA Driver
It is a 2-stage file upgrade procedure, first to upload the selected file onto HP-51M flash ROM ‘Upload Area’, then
to ‘Activate’ it. A coax network system with one HP-51M and seven connected EPs—include two 3010 EPs and
five 3110 Smart EPs, will be used as an example to demonstrate the upgrade details.
Current System Firmware and HCNA Driver Version
The system firmware version is ’3.05’ before upgrade, check the ‘
Information ’ window,
Open the ‘
EP Management ’ window, click on ‘Refresh’ button first to scan all connected EPs,