Heat & Glo Fireplace Heat & Glo PALOMA-BZ-MOD - Manual (Page 32)

Heat & Glo • PALOMA-BZ-MOD, PALOMA-GR-MOD, PALOMA-GY-MOD • 2189-900 Rev. i • 5/12 32
Figure 8.5
LAGGING
CLEARANCE
HOLE
Using pliers, adjust the counterscrews to level the appli-
ance.
Place the lag bolt from the component bag in the center
hole in the bottom plate (lagging clearance hole). The
appliance must be lagged down securely to prevent tip-
ping forward.
Figure 8.6
D. Accessories
Install approved accessories per instructions included
with accessories. See Service Parts List for appropriate
accessories. Refer to Section 12.
Shock or fi re risk.
Use ONLY optional accessories approved for
this appliance.
• Using non-listed accessories voids warranty.
• Using non-listed accessories may result in a
safety hazard.
• Only Hearth & Home Technologies approved
accessories may be used safely.
WARNING
C. Leveling and Lagging Down the Appliance
Lagging the appliance down is REQUIRED.
After unbolting the appliance from the pallet, insert two
1/4 20 x 1/1/2 counterscrews.
Using pliers, adjust the counterscrews to level the appli-
ance.
WARNING
Fire Risk.
Odor Risk.
Tipping Risk
• Install gas stove on a stable, level platform/
fl oor strong enough to support gas stove
without tipping.
• USE wood fl ooring, ceramic tile, brick hearth
or high pressure laminate fl ooring applied
directly over the sub-fl ooring material.
Figure 8.4
Securing holes
Lag bolt hole
Level
screw
Level
screw
Figure 8.3