HP 1Gb/2Gb switch 16B A7340-96002 - Manual (Page 20)

14 Quick Start Guide
– One LED in the center of the power supply side to indicate the
overall switch status.
• Two universal input and redundant power supplies with AC switches
and built-in fans. The power supplies plug into internal blind-mate
connectors when installed in the chassis.
• Two fan trays, each containing two fans. Air is pulled in through the rear
intake and pushed out through the vents on the SFP media side. The fans
provide adequate cooling for the maximum switch power rating of 102
Watts.
• Three digital thermometers, capable of sensing a temperature range
from -55 °C to +125°C, in 0.5°C increments.
• A motherboard that is completely enclosed in an EMI (electromagnetic
interference) enclosure tray. The logic and chassis ground are connected
to the chassis by screws. The embedded processor can process frames
up to 1024 bytes.
• A real-time clock (RTC) with a 10-year, non customer-replaceable
battery and 56 bytes of NVRAM.
SFP Media Side
Figure 10 shows the SFP media side of the FC 16B, which contains the
serial port, Ethernet port, fiber optic ports and their corresponding LEDs,
and the switch power LED.
Figure 10. The SFP Media Side of the FC 16B
Switch Power LED
Serial Port
Port Status LED (16x)
Optical Port (16x)
Port Speed LED (16x)
Ethernet Port