HP 1Gb/2Gb switch 16B A7340-96002 - Manual (Page 42)

36 Quick Start Guide
Environmental
The following table lists the acceptable environmental ranges.
Modes of
operation Fibre Channel Class 2 and Class 3
Aggregate
switch I/O
bandwidth 64 Gbps if all 16 ports running at 2 Gbps, full duplex
Frame buffers 27 buffers per E_Port and 16 buffers per F_Port at 2112
bytes per frame
Port to port
latency Less than 2 microseconds with no contention (destination
port is free)
Data
transmission
range Up to 500 m (1,625 ft.) for short-wavelength optical link
Up to 10 km (32,820 ft.) for long-wavelength optical link
Chassis type Forced-air cooling that flows from the power supply side
to the SFP media side
Specification Description
Condition Acceptable Range
Temperature (operating) 10°C to 40°C
Temperature (non-operating) -35°C to 65°C
Humidity (operating) 5% to 85% RH non-condensing, at 40°C
Humidity (non-operating) 0% to 90% RH non-conducting, at 40°C
Altitude (operating) 0 to 3 kilometers above sea level
Altitude (non-operating) 0 to 12 kilometers above sea level
Shock (operating) 4 G, 11 MS duration, half sine
Shock (non-operating) 20 G, 11 MS duration, sq. wave
Vibration (operating) 5 G, 0-3 kHz at 1.0 octave/minute