HP 1Gb/2Gb switch 16B A7340-96002 - Manual (Page 39)

Diagnostics 33
Note The transmit and receive speed of the links may be temporarily
locked to a specific speed during diagnostic testing.
Content
Addressable
Memory (CAM)
Test camTest Verifies CAM functionality. Run
offline.
Port Loopback
Test portLoopbackTest Checks all switch main board
hardware. Frames transmitted are
looped back and received. Run
offline.
Cross Port Test crossPortTest Checks all switch paths. Frames
transmitted by port M are looped
back via external cable and
received at port N. Run offline or
online.
Spin Silk Test spinSilk Checks all switch paths at the
maximum speed of 1 Gbps.
Frames transmitted by port M are
looped back via external cables
and when received by port N are
sent again by port M in an
external loop. Run offline.
SRAM Data
Retention Test sramRetentionTest Verifies that data written into
ASIC memories is retained. Runs
offline.
CMem Data
Retention Test CmemRetentionTest Verifies that data written into
ASIC SRAMs is retained. Runs
offline.
Switch Online switchEnable Returns switch to online state.
Test Command Description