HP 1Gb/2Gb switch 16B A7340-96002 - Manual (Page 29)

Setup 23
1. Verify that the RSHD service (on a UNIX machine) or the FTP service
(on a Windows machine) is running on the host workstation.
2. Login to the switch as the admin user.
3. At the command line enter the following command:
configUpload "hostIPaddr", "user",
"path_filename","password"
where hostIPaddr is the IP address of the host computer, user is the
User ID used to log into this computer, path_filename is the path
location and filename of the configuration file, and password is the
password for the user ID specified. If only configUpload is entered
the system prompts you for each parameter.
Example:
switch:admin> configupload
Server Name or IP Address [host]: 123.45.678.901
User Name [user]: kelev
File Name [config.txt]: switch1
Protocol (RSHD or FTP) [rshd]: ftp
Password:
upload complete
Restoring the System Configuration Settings
To restore the system configuration settings from a backup:
1. Verify that the RSHD service or the FTP service is running on the host
workstation (Windows or UNIX).
2. Login to the switch as the admin user.
3. Shut down the switch by entering the following command:
switchDisable
4. At the command line enter the following command:
configDownload "hostIPaddr", "user",
"path_filename","password"
where hostIPaddr is the IP address of the host computer containing
the configuration file, user is the User ID used to log into this
computer, path_filename is the path location and filename of the