Hach 900 MAX - Manual (Page 30)

Page 28
Setting Up the Bottles
8990hrd.fm
Section 2
For four-bottle sampling, install the distributor and place all four bottles in the
tray as shown in
Figure 11 .
Figure 10 Two-bottle Locations
Figure 11 Four-bottle Locations
2.5.3 Eight-, 12-, or 24-bottle Sampling
For eight-, 12- or 24-bottle sets, install the distributor (refer to section 2.6.1 on
page 30 ). Place the bottles in the tray and install the proper bottle retainer
( Figure 12 ).
Bottle #1 is the first bottle clockwise (looking down on the tray) from the right
side of the tray. Bottle #1 is located on the inside of each bottle tray for all
multiple bottle sets (
Figure 12 ).
1. Single Bottle Location 2. Two Bottle Location 3. Slots for Wire From Bottle Tray (8 or 24 bottle)
1. 1, 2, or 4 Bottle Locations 2. Slot for Wire From Bottle Tray (8 or 24 bottles)
1
2
1
2
3
Front
Front
2 3
1 4
1
2