Hach 900 MAX - Manual (Page 40)

Page 38
Basic Programming Setup
8990startup.fm
Section 3
To make changes to the program entries after the basic programming setup,
press
MAIN MENU and select SETUP>MODIFY SELECTED ITEMS and highlight
the program entry using the UP and DOWN keys.
To review all information in the Setup and Option menus without worrying
about accidentally changing the information, use the Review All Items function
to verify that the program is properly set up. For more information on this
function refer to
Review All Items on page 113 .
1. Press SETUP from the Main Menu to prepare the instrument for use.
2. From the Main Menu select SETUP>MODIFY ALL ITEMS .
3. Press ACCEPT to begin setting up the bottles.
Step 1 - Bottles
1-A. Enter the total number of sample bottles in the refrigeration
compartment, using the numeric keypad.
Note: The bottles may be installed directly in the refrigeration compartment or in the
removable bottle tray when using sets greater than four bottles.
1-B. Press ACCEPT to continue and move to the Bottle Volume menu.
11:00 AM 21 - APR - 01 * MAIN MENU*
DISPLAY DATA SETUP
OPTIONS STATUS
READY TO START
11:00 AM 21 - APR - 01 * MAIN MENU*
MODIFY
ALL ITEMS
REVIEW ALL
ITEMS MODIFY
SELECTED ITEMS
READY TO START
11:00 AM 21 - APR - 01 BOTTLES
ACCEPT NUMBER OF BOTTLES:
—
BACKUP
CLEAR
ENTRY
ENTER: 1, 2, 4, 8, 12, OR 24