HP 6200YL - Manual (Page 116)

IPv6 Management Features
SNTP and Timep
Syntax:. [no ] sntp server priority < 1 - 3 > < link-local-addr >%vlan< vid >[oobm]
[1 - 7]
[no ] sntp server priority < 1 - 3 > < global-unicast-addr >[oobm] [1 - 7]
Configures an IPv6 address for an SNTP server.
server priority < 1 - 3 >: Specifies the priority of the server ad­
dressing being configured. When the SNTP mode is set to uni­
cast and more than one server is configured, this value
determines the order in which the configured servers will be
accessed for a time value. The switch polls multiple servers in
order until a response is received or all servers on the list have
been tried without success. Up to three server addresses (IPv6
and/or IPv4) can be configured.
< link-local-addr >: Specifies the link-local IPv6 address of the
destination device.
%vlan< vid >: Suffix specifying the interface on which the des­
tination device is located. No spaces are allowed in the suffix.
< global-unicast-addr >: Specifies the global IPv6 address of the
destination device.
[oobm]: For switches that have a separate out-of-band
management port,
oobm specifies that SNTP traffic goes
through that port. (By default, SNTP traffic goes through the
data ports.)
[ 1 - 7 ]: This optional setting specifies the SNTP server version
expected for the specified server. (Default: 3)
5-12