Document Outline

• Table of contents
• 1 Introduction
  • 1.1 Welcome to viva
  • 1.2 Operation
  • 1.3 Device integration
  • 1.4 Method editor
  • 1.5 Database
  • 1.6 Communication
  • 1.7 Conformity
  • 1.8 Versions
  • 1.9 Online help
• 2 General program functions
  • 2.1 Program parts
    • 2.1.1 Program parts
    • 2.1.2 Workplace - User interface
    • 2.1.3 Database - User interface
    • 2.1.4 Method - User interface
    • 2.1.5 Configuration - User interface
    • 2.1.6 Manual control - User interface
  • 2.2 Login / password protection
    • 2.2.1 General information on login / password protection
    • 2.2.2 Logging in
    • 2.2.3 Logging out manually
    • 2.2.4 Logging out automatically
    • 2.2.5 Changing the password
  • 2.3 Formula editor
    • 2.3.1 Input field
    • 2.3.2 Calculation algorithms
    • 2.3.3 Variables
      • 2.3.3.1 Variables - Overview
      • 2.3.3.2 Sample data variables
      • 2.3.3.3 Sample data variables of the next sample data line
      • 2.3.3.4 Command variables
      • 2.3.3.5 Automatically calculated result variables
      • 2.3.3.6 User-defined result variables
      • 2.3.3.7 Determination variables
      • 2.3.3.8 System variables
      • 2.3.3.9 Common variables
      • 2.3.3.10 Global variables
    • 2.3.4 Operators/functions
      • 2.3.4.1 Operators/functions - Overview
      • 2.3.4.2 Arithmetical operators
        • 2.3.4.2.1 Addition
        • 2.3.4.2.2 Subtraction
        • 2.3.4.2.3 Multiplication
        • 2.3.4.2.4 Division
        • 2.3.4.2.5 Potentiation
      • 2.3.4.3 Logical operators
        • 2.3.4.3.1 AND
        • 2.3.4.3.2 OR
      • 2.3.4.4 Relational operators
        • 2.3.4.4.1 Equal to
        • 2.3.4.4.2 Greater than
        • 2.3.4.4.3 Greater than or equal to
        • 2.3.4.4.4 Less than
        • 2.3.4.4.5 Less than or equal to
        • 2.3.4.4.6 Not equal to
      • 2.3.4.5 Arithmetical functions
        • 2.3.4.5.1 Exponential function
        • 2.3.4.5.2 Natural logarithm
        • 2.3.4.5.3 Common logarithm
        • 2.3.4.5.4 Square root
        • 2.3.4.5.5 Absolute value
        • 2.3.4.5.6 Fraction
        • 2.3.4.5.7 Integer
        • 2.3.4.5.8 Rounding integer
        • 2.3.4.5.9 Sign
        • 2.3.4.5.10 Quantiles of the Student's t-distribution
      • 2.3.4.6 Date/Time functions
        • 2.3.4.6.1 Time()
        • 2.3.4.6.2 Time(Date)
        • 2.3.4.6.3 Time(Date + Time)
      • 2.3.4.7 Type conversion functions
        • 2.3.4.7.1 NumberToText
        • 2.3.4.7.2 NumberToTime
        • 2.3.4.7.3 TextToNumber
        • 2.3.4.7.4 TextToTime
        • 2.3.4.7.5 TimeToNumber
        • 2.3.4.7.6 TimeToText
      • 2.3.4.8 Text functions
        • 2.3.4.8.1 TextPosition
        • 2.3.4.8.2 SubText
        • 2.3.4.8.3 Trim
      • 2.3.4.9 Miscellaneous functions
        • 2.3.4.9.1 Case
        • 2.3.4.9.2 Error
      • 2.3.4.10 ASCII table
    • 2.3.5 Molar mass calculator
  • 2.4 Editing
    • 2.4.1 Selecting the date
    • 2.4.2 Text editor
    • 2.4.3 Hyperlink
  • 2.5 E-mail
    • 2.5.1 Sending an e-mail
• 3 Workplace
  • 3.1 Workplace - General
    • 3.1.1 Workplace - Definition
    • 3.1.2 Workplace - User interface
    • 3.1.3 Workplace - Menu bar
      • 3.1.3.1 Workplace - Main menus
      • 3.1.3.2 Workplace - File menu
      • 3.1.3.3 Workplace - View menu
      • 3.1.3.4 Workplace - Tools menu
      • 3.1.3.5 Help menu
    • 3.1.4 Workplace - Toolbar
    • 3.1.5 Workplace - Subwindows
    • 3.1.6 Workplace - Functions
    • 3.1.7 Views
      • 3.1.7.1 Views - General
      • 3.1.7.2 Changing the layout
      • 3.1.7.3 Loading a view
      • 3.1.7.4 Saving a view
      • 3.1.7.5 Renaming a view
      • 3.1.7.6 Deleting a view
  • 3.2 Workplaces
    • 3.2.1 Creating a new workplace
    • 3.2.2 Editing a workplace
    • 3.2.3 Displaying the workplace
      • 3.2.3.1 Selecting a workplace
      • 3.2.3.2 Displaying an individual workplace
      • 3.2.3.3 Displaying workplaces next to one another
      • 3.2.3.4 Displaying workplaces one above the other
    • 3.2.4 Closing a workplace
  • 3.3 Sample tables
    • 3.3.1 Editing the sample table
      • 3.3.1.1 Creating a new sample table
      • 3.3.1.2 Opening a sample table
      • 3.3.1.3 Editing the sample table
      • 3.3.1.4 Editing sample data
      • 3.3.1.5 Duplicating sample data
      • 3.3.1.6 Importing sample data
      • 3.3.1.7 Sample table test
      • 3.3.1.8 Saving a sample table
      • 3.3.1.9 Printing a sample table (PDF)
    • 3.3.2 Sample table - Properties
      • 3.3.2.1 Properties - Overview
      • 3.3.2.2 Properties - Display
      • 3.3.2.3 Properties - Edit
      • 3.3.2.4 Properties - Process
      • 3.3.2.5 Properties - Data import
      • 3.3.2.6 Properties - Comment
    • 3.3.3 Sample table manager
      • 3.3.3.1 Sample table manager
      • 3.3.3.2 Renaming sample table
      • 3.3.3.3 Copying sample table
      • 3.3.3.4 Deleting a sample table
      • 3.3.3.5 Exporting a sample table
      • 3.3.3.6 Importing a sample table
      • 3.3.3.7 Renaming imported sample table
  • 3.4 Sample assignment table
    • 3.4.1 Sample assignment table
    • 3.4.2 Sample assignment
    • 3.4.3 Entering an assignment ID
  • 3.5 Text templates
    • 3.5.1 List of text templates
    • 3.5.2 Editing a text template
  • 3.6 Run subwindow
    • 3.6.1 Run - General
    • 3.6.2 Run test
    • 3.6.3 Single determination
      • 3.6.3.1 Single determination - Overview
      • 3.6.3.2 Single determination - Operating elements
      • 3.6.3.3 Single determination - Status display
      • 3.6.3.4 Single determination - Determination parameters
      • 3.6.3.5 Single determination - Sample data
      • 3.6.3.6 Changing a remark
      • 3.6.3.7 Single determination - Determination run
      • 3.6.3.8 Single determination - Properties
        • 3.6.3.8.1 Properties - Overview
        • 3.6.3.8.2 Properties - Display
        • 3.6.3.8.3 Properties - Editing
        • 3.6.3.8.4 Properties - Process
        • 3.6.3.8.5 Properties - Data import
    • 3.6.4 Determination series
      • 3.6.4.1 Determination series - Overview
      • 3.6.4.2 Determination series - Operating elements
      • 3.6.4.3 Determination series - Status display
      • 3.6.4.4 Determination series - Determination parameters
      • 3.6.4.5 Determination series - Sample data
      • 3.6.4.6 Changing a remark
      • 3.6.4.7 Determination series - Determination run
      • 3.6.4.8 Working sample table
        • 3.6.4.8.1 Loading a new sample table
        • 3.6.4.8.2 Loading a sample table
        • 3.6.4.8.3 Editing sample data
        • 3.6.4.8.4 Duplicating sample data
        • 3.6.4.8.5 Importing sample data
        • 3.6.4.8.6 Sample table test
        • 3.6.4.8.7 Saving a sample table
        • 3.6.4.8.8 Printing a sample table (PDF)
      • 3.6.4.9 Determination series - Properties
        • 3.6.4.9.1 Properties - Overview
        • 3.6.4.9.2 Properties - Display
        • 3.6.4.9.3 Properties - Edit
        • 3.6.4.9.4 Properties - Process
        • 3.6.4.9.5 Properties - Data import
        • 3.6.4.9.6 Properties - Comment
  • 3.7 Method subwindow
    • 3.7.1 Method window - General
    • 3.7.2 Method window - Method run
    • 3.7.3 Method window - Evaluation
  • 3.8 Live display subwindow
    • 3.8.1 Live display - General
    • 3.8.2 Live display - Tracks
    • 3.8.3 Live display - Application note
    • 3.8.4 Live display - Messages
    • 3.8.5 Live display - Properties
  • 3.9 Curves subwindow
    • 3.9.1 Curve display
      • 3.9.1.1 Curve display - General
      • 3.9.1.2 Curve display CVS
        • 3.9.1.2.1 Tabs
        • 3.9.1.2.2 Voltammograms
        • 3.9.1.2.3 Calibration curve
    • 3.9.2 Curve properties
      • 3.9.2.1 Curve properties - General parameters
      • 3.9.2.2 Curve properties CVS
        • 3.9.2.2.1 Curve properties CVS - x axis
        • 3.9.2.2.2 Curve properties CVS - y1 axis
        • 3.9.2.2.3 Curve properties CVS - y2 axis
        • 3.9.2.2.4 Curve properties CVS - Options
  • 3.10 Report subwindow
    • 3.10.1 Report - General
    • 3.10.2 Latest report
    • 3.10.3 Selected report
    • 3.10.4 Report overview
    • 3.10.5 Properties report overview
• 4 Database
  • 4.1 Database - General
    • 4.1.1 Database - Definition
    • 4.1.2 Database - User interface
    • 4.1.3 Database - Menu bar
      • 4.1.3.1 Database - Main menus
      • 4.1.3.2 Database - File menu
      • 4.1.3.3 Database - Edit menu
      • 4.1.3.4 Database - View menu
      • 4.1.3.5 Database - Determinations menu
      • 4.1.3.6 Database - Tools menu
      • 4.1.3.7 Help menu
    • 4.1.4 Database - Toolbar
    • 4.1.5 Database - Subwindow
    • 4.1.6 Database - Functions
    • 4.1.7 Views
      • 4.1.7.1 Views - General
      • 4.1.7.2 Changing the layout
      • 4.1.7.3 Loading a view
      • 4.1.7.4 Saving a view
      • 4.1.7.5 Renaming a view
      • 4.1.7.6 Deleting a view
  • 4.2 Database display
    • 4.2.1 Opening a database
    • 4.2.2 Selecting a database
    • 4.2.3 Displaying a single database
    • 4.2.4 Displaying databases next to one another
    • 4.2.5 Displaying databases one above the other
    • 4.2.6 Closing a database
  • 4.3 Managing databases
    • 4.3.1 Managing databases
    • 4.3.2 Creating a new database
    • 4.3.3 Renaming a database
    • 4.3.4 Deleting a database
    • 4.3.5 Database properties
      • 4.3.5.1 Database properties - Overview
      • 4.3.5.2 Database properties - General
      • 4.3.5.3 Database properties - Access rights
      • 4.3.5.4 Database properties - Backup
      • 4.3.5.5 Database properties - Monitoring
    • 4.3.6 Backing up a database manually
    • 4.3.7 Restoring a database
  • 4.4 Templates
    • 4.4.1 Report templates
      • 4.4.1.1 Managing report templates
        • 4.4.1.1.1 Managing report templates
        • 4.4.1.1.2 Renaming report templates
        • 4.4.1.1.3 Copying report templates
        • 4.4.1.1.4 Deleting report templates
        • 4.4.1.1.5 Exporting report templates
        • 4.4.1.1.6 Importing report templates
      • 4.4.1.2 Creating new report templates
      • 4.4.1.3 Opening report templates
      • 4.4.1.4 Editing report templates
        • 4.4.1.4.1 Report template - General
          • 4.4.1.4.1.1 Report template - Overview
          • 4.4.1.4.1.2 Report template - User interface
          • 4.4.1.4.1.3 Report template - Menu bar
            • 4.4.1.4.1.3.1 Report template - Main menu
            • 4.4.1.4.1.3.2 Report template - File menu
            • 4.4.1.4.1.3.3 Report template - Edit menu
            • 4.4.1.4.1.3.4 Report template - View menu
            • 4.4.1.4.1.3.5 Report template - Insert menu
            • 4.4.1.4.1.3.6 Report template - Tools menu
            • 4.4.1.4.1.3.7 Report template - Help menu
          • 4.4.1.4.1.4 Report template - General toolbar
          • 4.4.1.4.1.5 Report template - Module-specific toolbar
          • 4.4.1.4.1.6 Report template - Module bar
        • 4.4.1.4.2 Report template - Functions
          • 4.4.1.4.2.1 Report template - Function overview
          • 4.4.1.4.2.2 Report template - Page setup
          • 4.4.1.4.2.3 Report template - Defining sections
          • 4.4.1.4.2.4 Report template - Inserting pages
          • 4.4.1.4.2.5 Report template - Inserting modules
          • 4.4.1.4.2.6 Report template - Editing modules
          • 4.4.1.4.2.7 Report template - Zooming
          • 4.4.1.4.2.8 Report template - Page preview
          • 4.4.1.4.2.9 Report template - Comment
          • 4.4.1.4.2.10 Report template - Options
          • 4.4.1.4.2.11 Report template - Saving
        • 4.4.1.4.3 Report template - Modules
          • 4.4.1.4.3.1 Report template - Text field
          • 4.4.1.4.3.2 Report template - Data field
          • 4.4.1.4.3.3 Report template - Date field
          • 4.4.1.4.3.4 Report template - Time field
          • 4.4.1.4.3.5 Report template - Page number
          • 4.4.1.4.3.6 Report template - Number of pages
          • 4.4.1.4.3.7 Report template - Fixed report
          • 4.4.1.4.3.8 Report template - Group field
          • 4.4.1.4.3.9 Report template - Result table
          • 4.4.1.4.3.10 Report template - Image
          • 4.4.1.4.3.11 Report template - Line
          • 4.4.1.4.3.12 Report template - Rectangle
          • 4.4.1.4.3.13 Report template - Curve field
          • 4.4.1.4.3.14 Report template - Calibration curve field
    • 4.4.2 Control chart templates
      • 4.4.2.1 Managing control chart templates
      • 4.4.2.2 Editing control chart templates
        • 4.4.2.2.1 Control chart template - Properties
        • 4.4.2.2.2 Control chart template - Graphics parameters
        • 4.4.2.2.3 Control chart template - Limit values
        • 4.4.2.2.4 Control chart template - Statistics
        • 4.4.2.2.5 Control chart template - Comment
    • 4.4.3 Export templates
      • 4.4.3.1 Managing export templates
      • 4.4.3.2 Editing export templates
        • 4.4.3.2.1 Export template - Properties
        • 4.4.3.2.2 Export template - Selecting fields
        • 4.4.3.2.3 Export template - Options for CSV format
        • 4.4.3.2.4 Export template - Options for measuring point list
        • 4.4.3.2.5 Export template - Request at file export
      • 4.4.3.3 XML export
  • 4.5 Determination overview
    • 4.5.1 Determination overview - General
      • 4.5.1.1 Determination overview - Overview
      • 4.5.1.2 Determination overview - Table
      • 4.5.1.3 Determination overview - Column display
      • 4.5.1.4 Determination overview - Filter selection
      • 4.5.1.5 Determination overview - Navigation bar
      • 4.5.1.6 Determination overview - Table navigation
      • 4.5.1.7 Determination overview - Data set selection
      • 4.5.1.8 Determination overview - Functions
    • 4.5.2 Determination overview - Functions
      • 4.5.2.1 Updating the determination overview
      • 4.5.2.2 Determination comment
      • 4.5.2.3 Searching for determinations
      • 4.5.2.4 Filtering determinations
        • 4.5.2.4.1 Filtering determinations - Overview
        • 4.5.2.4.2 Determinations - Last filter
        • 4.5.2.4.3 Determinations - Quick filter
        • 4.5.2.4.4 Determinations - Special filter
        • 4.5.2.4.5 Determinations - Deleting a filter
        • 4.5.2.4.6 Determinations - Saving a filter
        • 4.5.2.4.7 Determinations - Editing the filter criterion
      • 4.5.2.5 Determinations - Reprocessing
        • 4.5.2.5.1 Reprocessing - General
        • 4.5.2.5.2 Reprocessing - Window
        • 4.5.2.5.3 Recalculation rules
        • 4.5.2.5.4 Modifications
          • 4.5.2.5.4.1 Modifications - Overview
          • 4.5.2.5.4.2 Modifications - Method
          • 4.5.2.5.4.3 Modifications - Variables
          • 4.5.2.5.4.4 Modifying a variable
        • 4.5.2.5.5 Result view
          • 4.5.2.5.5.1 Result view - General
          • 4.5.2.5.5.2 Result view - Curves
            • 4.5.2.5.5.2.1 Curve display CVS
              • 4.5.2.5.5.2.1.1 Voltammograms
              • 4.5.2.5.5.2.1.2 Calibration curve
            • 4.5.2.5.5.2.2 Curve display MEAS
            • 4.5.2.5.5.2.3 Curves - Measuring point list
            • 4.5.2.5.5.2.4 Curve properties
              • 4.5.2.5.5.2.4.1 Curve properties - General parameters
              • 4.5.2.5.5.2.4.2 Curve properties CVS
              • 4.5.2.5.5.2.4.3 Curve properties MEAS
          • 4.5.2.5.5.3 Result view - Results overview
          • 4.5.2.5.5.4 Result display - Results
          • 4.5.2.5.5.5 Result view - User-defined results
      • 4.5.2.6 Sending determinations to
      • 4.5.2.7 Exporting determinations
      • 4.5.2.8 Importing determinations
      • 4.5.2.9 Deleting determinations
      • 4.5.2.10 Printing a determination overview
      • 4.5.2.11 Determinations - Report output
      • 4.5.2.12 Determinations - Showing method
      • 4.5.2.13 Determinations - Displaying history
      • 4.5.2.14 Determinations - Making current
      • 4.5.2.15 Determinations - Showing calibration curve
      • 4.5.2.16 Determinations - Control chart
      • 4.5.2.17 Printing a control chart
  • 4.6 Curves subwindow
    • 4.6.1 Curve display
      • 4.6.1.1 Curve display - General
      • 4.6.1.2 Curve display CVS
        • 4.6.1.2.1 Voltammograms
        • 4.6.1.2.2 Calibration curve
      • 4.6.1.3 Curve display MEAS
      • 4.6.1.4 Curves - Measuring point list
    • 4.6.2 Curve properties
      • 4.6.2.1 Curve properties - General parameters
      • 4.6.2.2 Curve properties CVS
        • 4.6.2.2.1 Curve properties CVS - x axis
        • 4.6.2.2.2 Curve properties CVS - y1 axis
        • 4.6.2.2.3 Curve properties CVS - y2 axis
        • 4.6.2.2.4 Curve properties CVS - Options
      • 4.6.2.3 Curve properties MEAS
        • 4.6.2.3.1 Curve properties MEAS - x axis
        • 4.6.2.3.2 Curve properties MEAS - y1 axis
        • 4.6.2.3.3 Curve properties MEAS - y2 axis
        • 4.6.2.3.4 Curve properties MEAS - Options
        • 4.6.2.3.5 Curve properties MEAS - Measuring point list
  • 4.7 Subwindow Information
    • 4.7.1 Information - Overview
    • 4.7.2 Information - Determination
    • 4.7.3 Information - Method
    • 4.7.4 Information - Sample
    • 4.7.5 Information - Configuration
    • 4.7.6 Information - Messages
    • 4.7.7 Information - Determination comment
  • 4.8 Results subwindow
    • 4.8.1 Results - General
    • 4.8.2 Results - Result overview
    • 4.8.3 Results - Results
    • 4.8.4 Results - User-defined results
    • 4.8.5 Results - Properties
• 5 Method
  • 5.1 Method - General
    • 5.1.1 Method - Definition
    • 5.1.2 Method - User interface
    • 5.1.3 Method - Menu bar
      • 5.1.3.1 Method - Main menus
      • 5.1.3.2 Method - File menu
      • 5.1.3.3 Method - Edit menu
      • 5.1.3.4 Method - View menu
      • 5.1.3.5 Method - Insert menu
      • 5.1.3.6 Help menu
    • 5.1.4 Method - Toolbar
    • 5.1.5 Method - Subwindow
    • 5.1.6 Method - Functions
  • 5.2 Method editor
    • 5.2.1 New method
    • 5.2.2 Opening a method
    • 5.2.3 Selecting a method
      • 5.2.3.1 Displaying a single method
      • 5.2.3.2 Displaying methods next to each other
      • 5.2.3.3 Displaying methods below each other
      • 5.2.3.4 Zoom for methods
    • 5.2.4 Editing a method
      • 5.2.4.1 Editing tracks
        • 5.2.4.1.1 Inserting a new track
        • 5.2.4.1.2 Selecting a track
        • 5.2.4.1.3 Moving a track
        • 5.2.4.1.4 Copying a track
        • 5.2.4.1.5 Cutting a track
        • 5.2.4.1.6 Inserting a track
        • 5.2.4.1.7 Deleting a track
      • 5.2.4.2 Editing commands
        • 5.2.4.2.1 Inserting a new command
        • 5.2.4.2.2 Selecting a command
        • 5.2.4.2.3 Moving a command
        • 5.2.4.2.4 Copying a command
        • 5.2.4.2.5 Cutting a command
        • 5.2.4.2.6 Inserting a command
        • 5.2.4.2.7 Deleting a command
        • 5.2.4.2.8 Command properties
        • 5.2.4.2.9 Command comment
    • 5.2.5 Checking a method
    • 5.2.6 Saving a method
    • 5.2.7 Printing a method report
    • 5.2.8 Closing a method
  • 5.3 Managing methods
    • 5.3.1 Managing methods
    • 5.3.2 Renaming a method
    • 5.3.3 Copying a method
    • 5.3.4 Moving a method
    • 5.3.5 Deleting a method
    • 5.3.6 Sending a method to
    • 5.3.7 Exporting a method
    • 5.3.8 Importing a method
    • 5.3.9 Renaming an imported method
    • 5.3.10 Showing the method history
  • 5.4 Method groups
    • 5.4.1 Managing method groups
    • 5.4.2 Editing method groups
      • 5.4.2.1 Method groups - Properties
      • 5.4.2.2 Method groups - General
      • 5.4.2.3 Method groups - Access rights
  • 5.5 Method run subwindow
    • 5.5.1 Tracks
      • 5.5.1.1 Tracks - General
      • 5.5.1.2 Track types
        • 5.5.1.2.1 Main track
        • 5.5.1.2.2 Normal track
        • 5.5.1.2.3 VA track
        • 5.5.1.2.4 Series start track
        • 5.5.1.2.5 Series end track
        • 5.5.1.2.6 Exit track
        • 5.5.1.2.7 Error track
      • 5.5.1.3 Editing tracks
    • 5.5.2 Commands
      • 5.5.2.1 Commands - General
        • 5.5.2.1.1 Definition and Representation
        • 5.5.2.1.2 Editing commands
        • 5.5.2.1.3 Alphabetical command overview
      • 5.5.2.2 Track commands
        • 5.5.2.2.1 Track commands - Overview
        • 5.5.2.2.2 START
          • 5.5.2.2.2.1 START - Overview
          • 5.5.2.2.2.2 START - General
          • 5.5.2.2.2.3 START - Application note
          • 5.5.2.2.2.4 START - Sample data variables (table)
          • 5.5.2.2.2.5 START - Sample data variables (properties)
        • 5.5.2.2.3 TRACK
        • 5.5.2.2.4 VA TRACK
        • 5.5.2.2.5 SERIES START
        • 5.5.2.2.6 SERIES END
        • 5.5.2.2.7 EXIT
        • 5.5.2.2.8 ERROR
        • 5.5.2.2.9 END
      • 5.5.2.3 Voltammetry commands
        • 5.5.2.3.1 Voltammetry commands - Overview
        • 5.5.2.3.2 CVS
          • 5.5.2.3.2.1 CVS - Overview
          • 5.5.2.3.2.2 CVS - General/Hardware
          • 5.5.2.3.2.3 CVS - Pretreatment
          • 5.5.2.3.2.4 CVS - Sweep
          • 5.5.2.3.2.5 CVS - Post-treatment
          • 5.5.2.3.2.6 CVS - Potentiostat
      • 5.5.2.4 Call commands
        • 5.5.2.4.1 Call commands - Overview
        • 5.5.2.4.2 CALL
          • 5.5.2.4.2.1 CALL - Overview
          • 5.5.2.4.2.2 CALL - Properties
          • 5.5.2.4.2.3 CALL - Call
        • 5.5.2.4.3 CALL VA
          • 5.5.2.4.3.1 CALL VA - Overview
          • 5.5.2.4.3.2 CALL VA - Properties
        • 5.5.2.4.4 CALL VMS
          • 5.5.2.4.4.1 CALL VMS - Overview
          • 5.5.2.4.4.2 CALL VMS - Properties
        • 5.5.2.4.5 CALL INTERCEPT
          • 5.5.2.4.5.1 CALL INTERCEPT - Overview
          • 5.5.2.4.5.2 CALL INTERCEPT - Properties
        • 5.5.2.4.6 CALL COND
          • 5.5.2.4.6.1 CALL COND - Overview
          • 5.5.2.4.6.2 CALL COND - Properties
      • 5.5.2.5 Measuring commands
        • 5.5.2.5.1 Measuring commands - Overview
        • 5.5.2.5.2 MEAS Ref
          • 5.5.2.5.2.1 MEAS Ref - Overview
          • 5.5.2.5.2.2 MEAS Ref - General/Hardware
          • 5.5.2.5.2.3 MEAS Ref - Measuring parameters
        • 5.5.2.5.3 MEAS Spec
          • 5.5.2.5.3.1 MEAS Spec - Overview
          • 5.5.2.5.3.2 MEAS Spec - General/Hardware
          • 5.5.2.5.3.3 MEAS Spec - Measuring parameters
          • 5.5.2.5.3.4 MEAS Spec - Evaluations
          • 5.5.2.5.3.5 MEAS Spec - Evaluation window
        • 5.5.2.5.4 MEAS Opt
          • 5.5.2.5.4.1 MEAS Opt - Overview
          • 5.5.2.5.4.2 MEAS Opt - General/Hardware
          • 5.5.2.5.4.3 MEAS Opt - Measuring parameters
          • 5.5.2.5.4.4 MEAS Opt - Evaluations
          • 5.5.2.5.4.5 MEAS Opt - Additional measured values
          • 5.5.2.5.4.6 MEAS Opt - Fixed endpoint evaluation
        • 5.5.2.5.5 MEAS Opt Conc
          • 5.5.2.5.5.1 MEAS Opt Conc - Overview
          • 5.5.2.5.5.2 MEAS Opt Conc - General/Hardware
          • 5.5.2.5.5.3 MEAS Opt Conc- Measuring parameters
          • 5.5.2.5.5.4 MEAS Opt Conc - Additional measured values
        • 5.5.2.5.6 MEAS TMF
          • 5.5.2.5.6.1 MEAS TMF - Overview
          • 5.5.2.5.6.2 MEAS TMF - General/Hardware
          • 5.5.2.5.6.3 MEAS TMF - Measuring parameters
        • 5.5.2.5.7 Additional measured values
          • 5.5.2.5.7.1 Calculated measured value
          • 5.5.2.5.7.2 External measured value
      • 5.5.2.6 Calibration commands
        • 5.5.2.6.1 Calibration commands - Overview
        • 5.5.2.6.2 CAL Spec
          • 5.5.2.6.2.1 CAL Spec - Overview
          • 5.5.2.6.2.2 CAL Spec - General/Hardware
          • 5.5.2.6.2.3 CAL Spec - Measuring parameters
          • 5.5.2.6.2.4 CAL Spec - Calibration wavelengths
          • 5.5.2.6.2.5 CAL Spec - Calibration wavelength #
        • 5.5.2.6.3 CAL LOOP Opt
          • 5.5.2.6.3.1 CAL LOOP Opt - Overview
          • 5.5.2.6.3.2 CAL LOOP Opt - Properties
        • 5.5.2.6.4 CAL MEAS Opt
          • 5.5.2.6.4.1 CAL MEAS Opt - Overview
          • 5.5.2.6.4.2 CAL MEAS Opt - General/Hardware
          • 5.5.2.6.4.3 CAL MEAS Opt - Measuring parameters
      • 5.5.2.7 Dosing commands
        • 5.5.2.7.1 Dosing commands - Overview
        • 5.5.2.7.2 ADD AUX
          • 5.5.2.7.2.1 ADD AUX - Overview
          • 5.5.2.7.2.2 ADD AUX - Properties
        • 5.5.2.7.3 ADD STD
          • 5.5.2.7.3.1 ADD STD - Overview
          • 5.5.2.7.3.2 ADD STD - Properties
        • 5.5.2.7.4 ADD SAMPLE
          • 5.5.2.7.4.1 ADD SAMPLE - Overview
          • 5.5.2.7.4.2 ADD SAMPLE - Properties
        • 5.5.2.7.5 ADD SAMPLE DT
          • 5.5.2.7.5.1 ADD SAMPLE DT - Overview
          • 5.5.2.7.5.2 ADD SAMPLE DT - Properties
        • 5.5.2.7.6 LQH
          • 5.5.2.7.6.1 LQH - Overview
          • 5.5.2.7.6.2 LQH - General/Hardware
          • 5.5.2.7.6.3 LQH - Parameters
        • 5.5.2.7.7 PREP
          • 5.5.2.7.7.1 PREP - Overview
          • 5.5.2.7.7.2 PREP - Properties
        • 5.5.2.7.8 EMPTY
          • 5.5.2.7.8.1 EMPTY - Overview
          • 5.5.2.7.8.2 EMPTY - Properties
        • 5.5.2.7.9 RLS DOS
          • 5.5.2.7.9.1 RLS DOS - Overview
          • 5.5.2.7.9.2 RLS DOS - Properties
      • 5.5.2.8 Automation commands
        • 5.5.2.8.1 Automation commands - Overview
        • 5.5.2.8.2 MOVE
          • 5.5.2.8.2.1 MOVE - Overview
          • 5.5.2.8.2.2 MOVE - Properties
        • 5.5.2.8.3 SWING
          • 5.5.2.8.3.1 SWING - Overview
          • 5.5.2.8.3.2 SWING - Properties
        • 5.5.2.8.4 LIFT
          • 5.5.2.8.4.1 LIFT - Overview
          • 5.5.2.8.4.2 LIFT - Properties
        • 5.5.2.8.5 PUMP
          • 5.5.2.8.5.1 PUMP - Overview
          • 5.5.2.8.5.2 PUMP - Properties
        • 5.5.2.8.6 STIR
          • 5.5.2.8.6.1 STIR - Overview
          • 5.5.2.8.6.2 STIR - Properties
        • 5.5.2.8.7 RACK
          • 5.5.2.8.7.1 RACK - Overview
          • 5.5.2.8.7.2 RACK - Properties
        • 5.5.2.8.8 HEATER
          • 5.5.2.8.8.1 HEATER - Overview
          • 5.5.2.8.8.2 HEATER - Properties
        • 5.5.2.8.9 RLS DEV
          • 5.5.2.8.9.1 RLS DEV - Overview
          • 5.5.2.8.9.2 RLS DEV - Properties
      • 5.5.2.9 Communication commands
        • 5.5.2.9.1 Communication commands - Overview
        • 5.5.2.9.2 CTRL
          • 5.5.2.9.2.1 CTRL - Overview
          • 5.5.2.9.2.2 CTRL - Properties
        • 5.5.2.9.3 SCAN
          • 5.5.2.9.3.1 SCAN - Overview
          • 5.5.2.9.3.2 SCAN - Properties
        • 5.5.2.9.4 SEND
          • 5.5.2.9.4.1 SEND - Overview
          • 5.5.2.9.4.2 SEND - Properties
          • 5.5.2.9.4.3 SEND - Sending the event message
        • 5.5.2.9.5 RECEIVE
          • 5.5.2.9.5.1 RECEIVE - Overview
          • 5.5.2.9.5.2 RECEIVE - Properties
          • 5.5.2.9.5.3 RECEIVE - Wait for event/status
        • 5.5.2.9.6 TRANSFER
          • 5.5.2.9.6.1 TRANSFER - Overview
          • 5.5.2.9.6.2 TRANSFER - Properties
          • 5.5.2.9.6.3 TRANSFER - Transfer command
      • 5.5.2.10 Various commands
        • 5.5.2.10.1 Various commands - Overview
        • 5.5.2.10.2 REQUEST
          • 5.5.2.10.2.1 REQUEST - Overview
          • 5.5.2.10.2.2 REQUEST - Properties
          • 5.5.2.10.2.3 REQUEST - Sample data request
        • 5.5.2.10.3 LOOP
          • 5.5.2.10.3.1 LOOP - Overview
          • 5.5.2.10.3.2 LOOP - Properties
        • 5.5.2.10.4 WAIT
          • 5.5.2.10.4.1 WAIT - Overview
          • 5.5.2.10.4.2 WAIT - Properties
        • 5.5.2.10.5 SEQUENCE
          • 5.5.2.10.5.1 SEQUENCE - Overview
          • 5.5.2.10.5.2 SEQUENCE - Properties
  • 5.6 Evaluation subwindow
    • 5.6.1 Evaluation - General
    • 5.6.2 Evaluation - General
      • 5.6.2.1 General - General
      • 5.6.2.2 General - Data processing
    • 5.6.3 Evaluation - Substances
      • 5.6.3.1 Substances - General
      • 5.6.3.2 Substances - Recognition
      • 5.6.3.3 Editing recognition
      • 5.6.3.4 Substances - Baselines
      • 5.6.3.5 Editing baselines
    • 5.6.4 Evaluation - Standards
      • 5.6.4.1 Standards - General
      • 5.6.4.2 Standards - Standards
      • 5.6.4.3 Editing standard
    • 5.6.5 Evaluation - Calibration
      • 5.6.5.1 Calibration- Overview
      • 5.6.5.2 Calibration - General
      • 5.6.5.3 Calibration - Calibration curves
      • 5.6.5.4 MLAT calibration curve properties
      • 5.6.5.5 DT calibration curve properties
    • 5.6.6 Evaluation - Results
      • 5.6.6.1 Results - General
      • 5.6.6.2 Results - Results
      • 5.6.6.3 Defining decimal places and assignment
      • 5.6.6.4 Defining decimal places
      • 5.6.6.5 Results - User-defined results
      • 5.6.6.6 Defining result
      • 5.6.6.7 Results - Variable assignment
      • 5.6.6.8 Assigning a variable
      • 5.6.6.9 Selecting a variable
      • 5.6.6.10 Selecting a result
      • 5.6.6.11 Results - Report
      • 5.6.6.12 Defining reports
      • 5.6.6.13 Results - Database
      • 5.6.6.14 Selecting a database
      • 5.6.6.15 Results - Export
      • 5.6.6.16 Selecting an export template
    • 5.6.7 Evaluation - Calculated results
      • 5.6.7.1 General
      • 5.6.7.2 Result calculation from calibration curves and error calculation
      • 5.6.7.3 Curve results
        • 5.6.7.3.1 Substance name
        • 5.6.7.3.2 Peak potential
        • 5.6.7.3.3 Area
        • 5.6.7.3.4 Mean value of the areas of all replications
        • 5.6.7.3.5 Absolute standard deviation of the areas of all replications
        • 5.6.7.3.6 Relative standard deviation of the areas of all replications
        • 5.6.7.3.7 Delta of the mean values of the areas of all replications
        • 5.6.7.3.8 Height
        • 5.6.7.3.9 Mean value of the heights of all replications
        • 5.6.7.3.10 Absolute standard deviation of the heights of all replications
        • 5.6.7.3.11 Relative standard deviation of the heights of all replications
        • 5.6.7.3.12 Delta of the mean values of the heights of all replications
        • 5.6.7.3.13 Start base point of the baseline
        • 5.6.7.3.14 End base point of the baseline
      • 5.6.7.4 Calibration curve results
        • 5.6.7.4.1 Coefficient k(0)
        • 5.6.7.4.2 Coefficient k(1)
        • 5.6.7.4.3 Coefficient k(2)
        • 5.6.7.4.4 Coefficient k(4)
        • 5.6.7.4.5 Coefficient of determination R2
      • 5.6.7.5 Volume results
        • 5.6.7.5.1 Total volume
        • 5.6.7.5.2 Total volume per variation
      • 5.6.7.6 Concentration results
        • 5.6.7.6.1 Concentration of the substance in the sample
        • 5.6.7.6.2 Unit of the concentration of the substance in the sample
        • 5.6.7.6.3 Absolute standard deviation of the concentration of the substance in the sample
        • 5.6.7.6.4 Relative standard deviation of the concentration of the substance in the sample
      • 5.6.7.7 Special results for DT and MLAT
        • 5.6.7.7.1 Standardized area
        • 5.6.7.7.2 Standardized height
        • 5.6.7.7.3 Effective addition volume of the standard solution for the evaluation ratio
        • 5.6.7.7.4 Unit of the effective addition volume of the standard solution for the evaluation ratio
        • 5.6.7.7.5 Absolute standard deviation of the effective addition volume of the standard solution for the evaluation ratio
        • 5.6.7.7.6 Relative standard deviation of the effective addition volume of the standard solution for the evaluation ratio
        • 5.6.7.7.7 Effective addition volume of the sample solution for the evaluation ratio
        • 5.6.7.7.8 Unit of the effective addition volume of the sample solution for the evaluation ratio
        • 5.6.7.7.9 Absolute standard deviation of the effective addition volume of the sample solution for the evaluation ratio
        • 5.6.7.7.10 Relative standard deviation of the effective addition volume of the sample solution for the evaluation ratio
        • 5.6.7.7.11 Calibration factor DT
        • 5.6.7.7.12 Unit of the calibration factor DT
        • 5.6.7.7.13 Absolute standard deviation of the calibration factor DT
        • 5.6.7.7.14 Relative standard deviation of the calibration factor DT
        • 5.6.7.7.15 Concentration of the substance in the measuring vessel
        • 5.6.7.7.16 Unit of the substance concentration in the measuring vessel
        • 5.6.7.7.17 Absolute standard deviation of the substance concentration in the measuring vessel
        • 5.6.7.7.18 Relative standard deviation of the substance concentration in the measuring vessel
        • 5.6.7.7.19 Substance quantity
        • 5.6.7.7.20 Suppressor concentration in the sample
        • 5.6.7.7.21 Absolute standard deviation of the concentration of the suppressor in the sample
        • 5.6.7.7.22 Relative standard deviation of the concentration of the suppressor in the sample
• 6 Configuration
  • 6.1 Configuration - General
    • 6.1.1 Configuration - Definition
    • 6.1.2 Configuration - User interface
    • 6.1.3 Configuration - Menu bar
      • 6.1.3.1 Configuration - Main menus
      • 6.1.3.2 Configuration - File menu
      • 6.1.3.3 Configuration - View menu
      • 6.1.3.4 Configuration - Tools menu
      • 6.1.3.5 Help menu
    • 6.1.4 Configuration - Toolbar
    • 6.1.5 Configuration - Subwindows
    • 6.1.6 Configuration - Functions
    • 6.1.7 Views
      • 6.1.7.1 Views - General
      • 6.1.7.2 Changing the layout
      • 6.1.7.3 Loading a view
      • 6.1.7.4 Saving a view
      • 6.1.7.5 Renaming a view
      • 6.1.7.6 Deleting a view
  • 6.2 Administration
    • 6.2.1 User administration
      • 6.2.1.1 User administration
      • 6.2.1.2 User groups
        • 6.2.1.2.1 User groups - Details
        • 6.2.1.2.2 User administration - Access permissions
        • 6.2.1.2.3 User administration - Options
        • 6.2.1.2.4 Adding a user group
        • 6.2.1.2.5 Copying a user group
        • 6.2.1.2.6 Renaming a user group
        • 6.2.1.2.7 Deleting a user group
      • 6.2.1.3 User
        • 6.2.1.3.1 User - Details
        • 6.2.1.3.2 Adding a user
        • 6.2.1.3.3 Setting a start password
    • 6.2.2 Security settings
      • 6.2.2.1 Security settings
      • 6.2.2.2 Test login for password monitoring by Windows
      • 6.2.2.3 Sending e-mail
      • 6.2.2.4 Printing configuration report (PDF)
    • 6.2.3 Program administration
      • 6.2.3.1 Program administration
      • 6.2.3.2 Backup directories
        • 6.2.3.2.1 Backup directories
        • 6.2.3.2.2 New backup directory
        • 6.2.3.2.3 Editing the backup directory
      • 6.2.3.3 Clients
      • 6.2.3.4 Licenses
      • 6.2.3.5 Adding licenses
  • 6.3 Configuration data
    • 6.3.1 Export/import
      • 6.3.1.1 Exporting configuration data
      • 6.3.1.2 Importing configuration data
    • 6.3.2 Back up/restore
      • 6.3.2.1 Backing up configuration data automatically
      • 6.3.2.2 Backing up configuration data manually
      • 6.3.2.3 Restoring configuration data
    • 6.3.3 Templates
      • 6.3.3.1 Templates - Input lines
        • 6.3.3.1.1 Managing templates for input lines
        • 6.3.3.1.2 Editing templates for input lines
      • 6.3.3.2 Templates - Output lines
        • 6.3.3.2.1 Managing templates for output lines
        • 6.3.3.2.2 Editing templates for output lines
      • 6.3.3.3 Templates - E-mail
        • 6.3.3.3.1 Managing e-mail templates
        • 6.3.3.3.2 Editing e-mail template
    • 6.3.4 Options
      • 6.3.4.1 Options - Overview
      • 6.3.4.2 Options - General
      • 6.3.4.3 Options - Save
      • 6.3.4.4 Options - PDF
  • 6.4 Devices subwindow
    • 6.4.1 Configuration - Devices
    • 6.4.2 Device table
      • 6.4.2.1 Device table - User interface
      • 6.4.2.2 Adding a new device
      • 6.4.2.3 Deleting a device
      • 6.4.2.4 Devices - Column display
      • 6.4.2.5 Editing ignored devices
      • 6.4.2.6 Printing the list of devices
    • 6.4.3 Device properties
    • 6.4.4 Device assignment
  • 6.5 Solutions subwindow
    • 6.5.1 Solutions - General
    • 6.5.2 Solution table
      • 6.5.2.1 Solution table
      • 6.5.2.2 Adding a new solution
      • 6.5.2.3 Deleting a solution
      • 6.5.2.4 Solutions - Column display
      • 6.5.2.5 Printing solution list
    • 6.5.3 Solution properties
      • 6.5.3.1 Editing solution properties
      • 6.5.3.2 Properties - Solution
      • 6.5.3.3 Properties - GLP
  • 6.6 Dosing units subwindow
    • 6.6.1 Dosing units - General
    • 6.6.2 Table of dosing units
      • 6.6.2.1 Table of dosing units
      • 6.6.2.2 Deleting a dosing unit
      • 6.6.2.3 Dosing units - Column display
      • 6.6.2.4 Printing the list of dosing units
    • 6.6.3 Properties of dosing unit
      • 6.6.3.1 Editing the properties of the dosing unit
      • 6.6.3.2 Properties - Dosing unit
      • 6.6.3.3 Properties - GLP
  • 6.7 Sensors/electrodes subwindow
    • 6.7.1 Sensors/electrodes - General
    • 6.7.2 Sensor table
      • 6.7.2.1 Sensor table
      • 6.7.2.2 Sensors - Column display
      • 6.7.2.3 Adding a new sensor
      • 6.7.2.4 Deleting a sensor
      • 6.7.2.5 Printing the sensor list
    • 6.7.3 Sensor properties
      • 6.7.3.1 Editing the sensor properties
      • 6.7.3.2 Properties - Sensor
  • 6.8 Colorimetric sensors subwindow
    • 6.8.1 Colorimetric sensors - General
    • 6.8.2 Table - Colorimetric sensors
      • 6.8.2.1 Table - Colorimetric sensors
      • 6.8.2.2 Colorimetric sensors - Column display
      • 6.8.2.3 Adding a new colorimetric sensor
      • 6.8.2.4 Deleting a colorimetric sensor
      • 6.8.2.5 Printing the list of colorimetric sensors (PDF)
    • 6.8.3 Properties - Colorimetric sensors
      • 6.8.3.1 Editing the sensor properties
      • 6.8.3.2 Properties - Colorimetric sensors
      • 6.8.3.3 Properties - Calibration data
      • 6.8.3.4 Properties - Limit values
      • 6.8.3.5 Properties - History
      • 6.8.3.6 Colorimetric sensor history - Limit values
  • 6.9 Common variables subwindow
    • 6.9.1 Configuration - Common variables
    • 6.9.2 Table of common variables
      • 6.9.2.1 Table of common variables
      • 6.9.2.2 Adding a new common variable
      • 6.9.2.3 Deleting a common variable
      • 6.9.2.4 Common variables - Column display
      • 6.9.2.5 Printing the list of common variables
    • 6.9.3 Properties common variables
      • 6.9.3.1 Editing properties of common variables
      • 6.9.3.2 Properties - Common variable
      • 6.9.3.3 Properties - History
      • 6.9.3.4 History - Limit values
  • 6.10 Global variables subwindow
    • 6.10.1 Configuration - Global variables
    • 6.10.2 Table of global variables
      • 6.10.2.1 Table of global variables
      • 6.10.2.2 Adding a new global variable
      • 6.10.2.3 Deleting a global variable
      • 6.10.2.4 Global variables - Column display
      • 6.10.2.5 Printing the list of global variables
    • 6.10.3 Properties global variables
      • 6.10.3.1 Editing the properties of the global variable
      • 6.10.3.2 Properties - Global variable
      • 6.10.3.3 Properties - History
      • 6.10.3.4 History - Limit values
  • 6.11 Rack data subwindow
    • 6.11.1 Configuration - Rack data
    • 6.11.2 Rack table
      • 6.11.2.1 Rack table
      • 6.11.2.2 Adding a new rack
      • 6.11.2.3 Deleting a rack
      • 6.11.2.4 Printing the rack list
    • 6.11.3 Rack properties
      • 6.11.3.1 Editing rack properties
      • 6.11.3.2 Properties - Rack parameters
      • 6.11.3.3 Properties - Lift positions
      • 6.11.3.4 Properties - Special beaker
      • 6.11.3.5 Special beaker
• 7 Devices
  • 7.1 894 Professional CVS
    • 7.1.1 894 Professional CVS - Overview
    • 7.1.2 Properties - General
    • 7.1.3 Properties - MSB #
    • 7.1.4 Properties - Calibrator
    • 7.1.5 Properties - GLP
    • 7.1.6 Dialog window Load new program version
  • 7.2 846 Dosing Interface
    • 7.2.1 846 Dosing Interface - Overview
    • 7.2.2 Properties - General
    • 7.2.3 Properties - MSB #
    • 7.2.4 Properties - GLP
  • 7.3 858 Professional Sample Processor
    • 7.3.1 858 Professional Sample Processor - Overview
    • 7.3.2 Properties - General
    • 7.3.3 Properties - Tower
    • 7.3.4 Properties - Rack
    • 7.3.5 Properties - Starting position
    • 7.3.6 Properties - MSB #
    • 7.3.7 Properties - GLP
    • 7.3.8 Robotic arm configuration
    • 7.3.9 External position
  • 7.4 919 IC Autosampler plus
    • 7.4.1 919 IC Autosampler plus - Overview
    • 7.4.2 Properties - General
    • 7.4.3 Properties - Tower
    • 7.4.4 Properties - Rack
    • 7.4.5 Properties - Starting position
    • 7.4.6 Properties - MSB #
    • 7.4.7 Properties - GLP
    • 7.4.8 Robotic arm configuration
    • 7.4.9 External position
  • 7.5 814/815 USB Sample Processor
    • 7.5.1 814/815 USB Sample Processor - Overview
    • 7.5.2 Properties - General
    • 7.5.3 Properties - Tower
    • 7.5.4 Properties - Rack
    • 7.5.5 Properties - Starting position
    • 7.5.6 Properties - MSB #
    • 7.5.7 Properties - GLP
    • 7.5.8 Robotic arm configuration
    • 7.5.9 External position
  • 7.6 Avantes Spectrometer
    • 7.6.1 Avantes Spectrometer - Overview
    • 7.6.2 Properties - General
    • 7.6.3 Properties - Settings
    • 7.6.4 Properties - Detector
    • 7.6.5 Properties - Calibration
    • 7.6.6 Properties - Dark spectrum
    • 7.6.7 Properties - Reference spectrum
    • 7.6.8 Properties - GLP
  • 7.7 089 Photometer
    • 7.7.1 089 Photometer - Overview
    • 7.7.2 Properties - General
    • 7.7.3 Properties - Settings
    • 7.7.4 Properties - Adjustment
    • 7.7.5 Properties - MSB #
    • 7.7.6 Properties - GLP
  • 7.8 RS-232 device
    • 7.8.1 RS-232 device - Overview
    • 7.8.2 Properties - General
    • 7.8.3 Properties - RS-232
    • 7.8.4 Properties - GLP
    • 7.8.5 Establishing a connection with the RS-232 device
  • 7.9 Barcode reader
    • 7.9.1 Barcode reader - General
    • 7.9.2 Barcode reader - Overview
    • 7.9.3 Properties - General
    • 7.9.4 Properties - Settings
    • 7.9.5 Properties - GLP
    • 7.9.6 Establishing a connection with the barcode reader
• 8 Manual control
  • 8.1 Manual control - General
  • 8.2 Manual control - User interface
  • 8.3 Manual control - Device selection
  • 8.4 Manual control - Functions
    • 8.4.1 Measuring
      • 8.4.1.1 Measuring - Overview
      • 8.4.1.2 Measuring - Potentiostat
      • 8.4.1.3 Measuring - Electrodes
    • 8.4.2 Dosing
      • 8.4.2.1 Dosing - Overview
      • 8.4.2.2 Dosing - General
      • 8.4.2.3 Dosing - Preparing
      • 8.4.2.4 Dosing - Filling
      • 8.4.2.5 Dosing - Emptying
      • 8.4.2.6 Dosing - Dosing a fixed volume
      • 8.4.2.7 Dosing - Dosing
    • 8.4.3 Stirring
      • 8.4.3.1 Stirring - Overview
      • 8.4.3.2 Stirring - Switching on/off
      • 8.4.3.3 Stirring - Operating time
    • 8.4.4 Remote functions
    • 8.4.5 Sampler changer functions
      • 8.4.5.1 Sample changer - Overview
      • 8.4.5.2 Sample changer - General
      • 8.4.5.3 Sample changer - Moving
      • 8.4.5.4 Sample changer - Assigning a position
      • 8.4.5.5 Sample changer - Pumping
  • 8.5 Manual control - Graphical display
• 9 Support
  • 9.1 How to proceed?
    • 9.1.1 Fuse
      • 9.1.1.1 Backing up a database
      • 9.1.1.2 Restoring a database
      • 9.1.1.3 Backing up configuration data
      • 9.1.1.4 Restoring configuration data
      • 9.1.1.5 Backing up methods
    • 9.1.2 Determinations
      • 9.1.2.1 Starting a single determination
      • 9.1.2.2 Starting a determination series
      • 9.1.2.3 Searching for determinations
      • 9.1.2.4 Filtering determinations
      • 9.1.2.5 Exporting determinations
      • 9.1.2.6 Importing determinations
      • 9.1.2.7 Deleting determinations
      • 9.1.2.8 Making a determination version current
      • 9.1.2.9 Reprocessing determinations
      • 9.1.2.10 Printing a determination report
      • 9.1.2.11 Printing a determination overview
    • 9.1.3 Databases
      • 9.1.3.1 Opening a database
      • 9.1.3.2 Closing a database
      • 9.1.3.3 Creating a database
      • 9.1.3.4 Backing up a database
      • 9.1.3.5 Restoring a database
      • 9.1.3.6 Deleting a database
    • 9.1.4 Configuration data
      • 9.1.4.1 Exporting configuration data
      • 9.1.4.2 Importing configuration data
      • 9.1.4.3 Backing up configuration data
      • 9.1.4.4 Restoring configuration data
    • 9.1.5 Methods
      • 9.1.5.1 Opening a method
      • 9.1.5.2 Closing a method
      • 9.1.5.3 Creating a method
      • 9.1.5.4 Saving a method
      • 9.1.5.5 Deleting a method
      • 9.1.5.6 Exporting a method
      • 9.1.5.7 Importing a method
      • 9.1.5.8 Making a method version current
      • 9.1.5.9 Printing a method report
      • 9.1.5.10 Saving a method
    • 9.1.6 Method groups
      • 9.1.6.1 Creating a method group
      • 9.1.6.2 Deleting a method group
    • 9.1.7 Sample tables
      • 9.1.7.1 Creating a sample table
      • 9.1.7.2 Editing a sample table
      • 9.1.7.3 Loading a working sample table
      • 9.1.7.4 Editing a working sample table
    • 9.1.8 Reports
      • 9.1.8.1 Creating a report template
      • 9.1.8.2 Editing a report template
      • 9.1.8.3 Printing a determination report
      • 9.1.8.4 Printing a determination overview
  • 9.2 Troubleshooting
    • 9.2.1 894 Professional CVS
    • 9.2.2 Peripheral devices
  • 9.3 Frequently asked questions
• Glossary
• Index