Metrohm viva 1.0 Manual - Manual (Page 512)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
500 ￭￭￭￭￭￭￭￭
viva 1.0
not defined
The dosing unit must be assigned with not defined by the user at the
start of the method.
5.5.2.8 Automation commands
5.5.2.8.1 Automation commands - Overview
Menu item: Method ▶ Insert ▶ New command... ▶ Automation
Commands for the operation of sample changers.
The following automation commands can be selected:
￭ MOVE
Moves to a rack position or an external position.
￭ SWING
Swings the robotic arm (only with Swing Head).
￭ LIFT
Moves to a lift position.
￭ PUMP
Activates/deactivates the connected pumps.
￭ STIR
Controls a connected stirrer.
￭ RACK
Initializing the rack attached.
￭ HEATER
Control of the heater of the 089 Photometer.
￭ RLS DEV
Releasing an instrument for use in other methods that run in parallel.
5.5.2.8.2 MOVE
5.5.2.8.2.1 MOVE - Overview
Dialog window: Method ▶ MOVE ▶ Properties... ▶ MOVE - 'Command name'
Command for moving to the desired position (sample position or spe-
cial beaker).
Instruments
This command can be executed with the following instruments:
Sample changer: 814, 815, 858, 919
Appearance
The command has the following appearance: