Metrohm viva 1.0 Manual - Manual (Page 753)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
7 Devices
viva 1.0
￭￭￭￭￭￭￭￭ 741
Selection off
Default value off
Lift rate
Lift rate for manual operation.
Input range 3 - 25 mm/s
Default value 25 mm/s
Axial distance
Distance between the axis of rotation of the sample rack and the swing
axis of the robotic arm.
814 USB Sample Processor, 858 Professional Sample Processor
Input range
100.0 - 300.0 mm
Default value 166.0 mm
815 Robotic USB Sample Processor XL, 919 IC Autosampler plus
Input range
100.0 - 300.0 mm
Default value 196.0 mm
Swing Head
This parameter is only shown only if a Swing Head is mounted on the
tower.
Serial number
Shows the serial number of the Swing Head.
Swing position
Lift position that is valid for all four external positions and at which the
robotic arm turns to the external positions.
Input range 0 - 235 mm
Default value 0 mm
Rinse position
Rinse position that is valid for all four external positions and which can be
approached with the LIFT command.
Input range 0 - 235 mm
Default value 0 mm
[Configuration]
Opens the Robotic arm configuration dialog window (see Chapter
7.3.8, page 747), in which the properties of the robotic arm can be
edited.