Metrohm viva 1.0 Manual User Manual
Page 119
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Workplace
viva 1.0
￭￭￭￭￭￭￭￭
107
The Run test - 'Workplace name' - Single determination dialog win-
dow, in which information on the test is shown, opens during the run
test.
Method
Display of the method for the single determination.
Determination series
The start test is carried out with the Tools
▶ Run test menu items or the
symbol. The workplace must have the status READY for this. The start
test will, however, only be carried out for the number of lines defined
under Autostart.
The Run test - 'Workplace name' - Determination series dialog win-
dow, in which information on the test is shown, opens during the run
test.
Line
Display of the line number of the currently tested sample data line for the
determination series.
Status displays
One of the following status displays appears below the line number:
Selection
Run test running... | Run test error | Run test
finished without errors
Run test running...
This display appears while the test is running. In addition, a progress
bar appears. The test can be canceled by clicking on [x] next to the
progress bar.
Run test error
This display appears if an error has occurred during the run test. In a
determination series, the user can determine on the basis of the indica-
ted line number to which line the error message appearing with the
error and being displayed in the usual message window belongs.
Run test finished without errors
This display appears at the end of a run test that has been completed
without an error.