Metrohm viva 1.0 Manual - Manual (Page 441)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.0
￭￭￭￭￭￭￭￭ 429
Input range 0 - 100 pixels
Default value 0 pixels
5.5.2.5.3.4 MEAS Spec - Evaluations
Tab: Method ▶ MEAS Spec ▶ Properties... ▶ Evaluations
Command name
Name of the command.
Entry 25 characters
The evaluation windows for the evaluation of measurement curves can be
activated and defined on this tab.
[New]
Opens the Evaluation window # dialog window for entering the start
and end wavelengths (see Chapter 5.5.2.5.3.5, page 429).
[Properties]
Opens the Evaluation window # dialog window for editing the start
and end wavelengths selected in the table (see Chapter 5.5.2.5.3.5, page
429).
[Delete]
Deletes the selected line.
5.5.2.5.3.5 MEAS Spec - Evaluation window
Dialog window: Method ▶ MEAS Spec ▶ Properties... ▶ Evaluations ▶ [New] /
[Properties] ▶ Evaluation window #
Start wavelength
Lower limit of the spectrum.
Input range 100.0 - 2,000.0 nm
Default value 400.0 nm
End wavelength
Upper limit of the spectrum.
Input range 100.0 - 2,000.0 nm
Default value 1,000.0 nm