Metrohm viva 1.0 Manual - Manual (Page 863)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
9 Support
viva 1.0
￭￭￭￭￭￭￭￭ 851
4 Edit the properties of the new sample table.
5 Click on [OK].
The Properties - Sample table 'New sample table' dialog win-
dow closes.
6 Click on the [Edit] ▶ Edit line menu item in the Sample table
'New sample table' dialog window.
The Edit line - Sample table 'New sample table' dialog window
opens.
7 Select the desired method in the Method selection list and enter the
sample data.
8 Click on [Apply].
The sample data entered is applied to the respective line in the sam-
ple table.
9 Repeat step 6 for each required determination.
10 Click on [Close].
The Edit line - Sample table 'New sample table' dialog window
closes.
11 Click on the [Sample table] ▶ Save as... menu item in the Sample
table 'New sample table' dialog window.
The Save sample table dialog window opens.
12 Enter the required name in the Name field.
13 Click on [Save].
The sample table is saved under the name that has been entered.
9.1.7.2 Editing a sample table
How to proceed?
1 Select the Workplace program part.