Metrohm viva 1.0 Manual - Manual (Page 107)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Workplace
viva 1.0
￭￭￭￭￭￭￭￭ 95
3.3.2.3 Properties - Edit
Tab: Workplace ▶ Tools ▶ Sample table ▶ Open... ▶ Open sample
table ▶ [Open] ▶ Sample table 'Name' ▶ [Sample table] ▶ Properties... ▶ Proper-
ties - Sample table 'Name' ▶ Edit
Dialog window: Workplace ▶ View ▶ Properties ▶ ▶ Properties Run win-
dow ▶ Properties - Determination series ▶ Edit
Dialog window: Workplace ▶ Run ▶ Determination series ▶ [Sample table] ▶ Prop-
erties... ▶ Properties - Determination series ▶ Edit
Options for the editing of the sample table.
Accept data with
on | off (Default value: off)
Selection of the data field that must be filled for the automatic import of
data via barcode reader or file in order for the data of the line to be
applied to the sample data storage and to move on to the next line.
Selection ID1 | ID2 | ID3 | ID4 | ID5 | ID6 | ID7 | ID8 | ID9 |
ID10 | ID11 | ID12 | ID13 | ID14 | ID15 | ID16 |
Sample type | Sample position | Sample
amount | Sample amount unit | Analytical vol-
ume | Dilution volume
Default value Sample amount
Lock editing in working sample table
on | off (Default value: off)
If this check box is activated, then the editing of lines in the working sam-
ple table is locked.
Copy automatically into next line
Method
on | off (Default value: on)
If this check box is activated, then this field will automatically be filled with
the content of the previous line when a new sample data line is created.
ID1 - ID3
on | off (Default value: on)
If this check box is activated, then this field will automatically be filled with
the content of the previous line when a new sample data line is created.