Product identification, Product features – FMI PFS DVF42NH-HA User Manual

Page 5

Advertising
background image

www.fmiproducts.com

125078-01B

5

Figure 1 - Direct Vent Fireplace

Outer

Glass Door

Log Set

Flue Collar

Nailing Flange

Lower Door/

Control Cover

Herringbone Brick

Refractories

PrODUct iDentiFicAtiOn

Grate

PrODUct FeAtUreS

These are a few facts that can help you under-

stand and enjoy your direct vent fireplace:
• The venting system may be routed to the

outside of your home in several ways. It

may vent through the roof (vertical) or it

may vent to an outside/exterior wall (hori-

zontal). The vent pipe installation is very

important to allow for proper operation.

You must follow the venting instructions

very carefully for either vertical or horizontal

applications.

• This fireplace may be installed in any room

of your house provided all local codes and

these installation instructions are followed.

• Each time you turn on your fireplace, you

may notice some amount of condensation

on the inside of the fireplace glass. This

is normal and will disappear after 10-20

minutes of operation.

• Your direct vent gas fireplace system

(fireplace and venting) is a balanced and

sealed gas operating unit. It requires ap-

proximately 10-20 minutes of operating

time before the flame pattern stabilizes.

Advertising