Fluke 434 - Manual (Page 118)

Fluke 433/434
Users Manual
21-16
Electro Magnetic Compatibility (EMC)
Item Customer Specification Additional Information
Emission and Immunity EN-61326 Fluke 433/434, including standard
accessories, conforms with the
EEC directive 89/336 for EMC
immunity, as defined by EN-
61326, with the addition of the
table below
Frequency Disturbance < 0.5 % Disturbance < 10 %
80 – 400 MHz All ranges
400 – 600 MHz All other ranges 125 V range
600 MHz – 1 GHz All ranges
The Analyzer is susceptible for RF fields with a field strength of 10 V/m, between 400 and 600 MHz
(Performance criteria B).
Safety
Item Customer Specification Additional Information
including approval
Reference Standards EN/IEC61010-1 2nd edition
1000V Measurement Category III,
600V Measurement Category IV,
Pollution Degree 2.
ANSI/ISA S82.01-1994
CAN/CSA C22.2 No. 61010-1-04
(including approval) According to CE marking
Max voltage between any
Voltage banana input and
safety ground 1000 V CAT III 600 V CAT IV At altitude 2000 m … 3000 m:
1000 V CAT II, 600 V CAT III,
300 V CAT IV
42 Vpeak Max voltage on
Current BNC input REMARK: the BNC grounds of
the BNC’s are connected to the
ground banana input