Farallon Communications 612 User Manual
Page 109
Troubleshooting
7-9
Caution!
If the firmware download is interrupted or does not seem to
complete properly,
do not reset or disconnect the ISDN modem, as
this may damage the memor y chip inside the ISDN modem. If the
serial cable is disconnected or your computer crashes, reconnect
the cable or restar t the computer and tr y to download the firmware
again.
Using DOS
When you download the firmware from DOS, make sure you per form
the download directly from DOS, not from a DOS shell prompt inside
Windows.
3.
Change to the director y that contains the Netopia software you
copied from the Netopia ISDN Modem Configuration Software
for DOS and Windows disk. For information about copying the
Netopia software,
see the “Configuration using DOS” section
4.
At the system prompt, type:
install
and press Enter.
5.
Use the Up Arrow and Down Arrow keys to choose the Firmware
Upgrade command from the Main Menu. Press Enter.
The program displays the Farallon Netopia Binar y files in the
current director y.
6.
If necessar y, use the Up Arrow and Down Arrow keys to select
the binar y file that contains the latest firmware. Press Enter. A
message box appears.
7.
Press the F10 function key to continue the upgrade.
The download takes several minutes. When the download is
complete, select Exit.