Farallon Communications 612 - Manual (Page 122)

A-12 Netopia ISDN Modem User’s Guide
For example, to enable Auto Answer, enter the following using your
communications application: ATS0=1.
Register Description
0 Auto Answer
0 — Disabled (default)
1 — Enabled
50* ISDN Switch Signaling Type
0 — Unknown
1 — AT&T 5ESS Custom
3 — NI-1/AT&T 5ESS
6 — NI-1/NTI DMS 100 or Siemens EWSD
51* Phone #1
52* Phone #1 Ser vice Profile ID (SPID)
53* Phone #2 (if required by your carrier)
54* Phone #2 Ser vice Profile ID (SPID)
(if required by your carrier)
55 Terminal Endpoint Identifier 1 (TEIs)
Stores the first TEI assigned by the switch if a second
director y number is required by your carrier. A value of
255 indicates no TEI has been assigned. This field is
read-only.
56 Terminal Endpoint Identifier 2 (TEI)
Stores the second TEI assigned by the switch. A value
of 255 indicates no TEI has been assigned. This field
is read-only.