Farallon Communications 612 - Manual (Page 123)

Modem Operation A-13
57 Terminal Initialization State for SPID 1
Indicates the status of the first TEI using SPID 1. This
field is read-only.
0 — Netopia ISDN Modem has not attempted
initialization
1 — Netopia ISDN Modem has initialized
successfully using SPID 1
2 — Netopia ISDN Modem has failed initialization
using SPID 1
58 Terminal Initialization State for SPID 2
Indicates the status of the second TEI using SPID 2.
This information is provided only if your carrier
requires a second director y number. This field is
read-only.
0 — Netopia ISDN Modem has not attempted
initialization
1 — Netopia ISDN Modem has initialized successfully
using SPID 2
2 — Netopia ISDN Modem has failed initialization
using SPID 2
59 U Inter face Status
This field is read-only.
0 — U inter face is not synchronized with the switch
1 — U inter face is synchronized and ready
60* B Channel Data Rate
56 — 56 Kbps (default)
64 — 64 Kbps
61 Outgoing Call Type
0 — Follow dial modifiers (default)
1 — Switched 56 (Toll Saver)
2 — ISDN
Register Description