Farallon Communications 612 - Manual (Page 46)

4-8 Netopia ISDN Modem User’s Guide
If you select the Toll Saver option in the configuration dialog box, Toll
Saver will be applied to all outgoing ISDN calls. You must disable
the Toll Saver feature to place calls to devices that do not suppor t
this feature.
11. To change the B channel data rate, select either 56, 64, or Toll
Saver for the B Channel Rate. For more information about Toll
Saver,
see the “Placing a Toll Saver call” section on page 6-8.
Step 12: Enabling and
disabling Multilink PPP
Multilink PPP allows a maximum digital connection of up to 128
Kbps by vir tually linking two 56 Kbps or 64 Kbps B channels.
12. Click in the Multilink check box in the PPP area (lower-right cor-
ner) to toggle Multilink PPP. If the box is checked, Multilink PPP
is on. For more information about Multilink PPP, see the
“Using
Multilink PPP” section on page 6-4 .
Steps 13 to 14:
Completing the
configuration
13. Click the Update button to download the parameters displayed
in the dialog box to your ISDN modem.
14. Check the status area to verify the configuration. If the parame-
ters were configured accurately and the ISDN modem is ready
to send and receive calls, the status area fields should contain
the information shown below. Note that you do not configure
the Terminal Endpoint Identifier (TEI) numbers, they are gener-
ated automatically by the telephone company.
■ Layer 1: UP
■ SPID 1: Init
■ TEI 1: Number from 0 to 127
■ SPID 2: Init (if required)
■ TEI 2: Number from 0 to 127 (if required)