Farallon Communications 612 - Manual (Page 120)

A-10 Netopia ISDN Modem User’s Guide
&F Restores all factor y default settings.
H Hangs up the current connection.
I Identification
I0
displays the product and options ID.
I1 displays the flash memor y checksum.
I3 displays the modem model, inter face type,
firmware revision number, firmware release
date, and boot version number.
O Enter connect state. Causes the ISDN modem to
go out of command mode into online mode.
Q Result code control
Q0
enables the output of result codes (default).
Q1 disables the output of result codes.
Q2 disables the output of result codes in
answer mode only.
\Q Serial por t flow control
\Q0
disables flow control.
\Q1 enables bidirectional XON/XOFF software
flow control.
\Q3 enables bidirectional RTS/CTS hardware
flow control (default).
%R Provides an output list of all S registers.
%S Displays internal manufacturing control number.
Sn? Reads a specific S register setting.
Sn= Writes to a specific S register.
\S Reads the status of any parameters that have
been modified through AT commands.
Command Description