Farallon Communications NetopiaTM - Manual (Page 15)

Installation 15
W INDOWS NT 3.51
1. Open the Accessories and select Terminal.
2. From the Settings menu, select Communications, and the follow-
ing screen will appear:
3. Select a COM por t from the Connector list and click OK.
4. Type the following command:
ATI8
If the response “Farallon Communications, Inc. Netopia ISDN PC
Card” is returned, then the correct COM por t for the Netopia ISDN
PC Card has been selected.
If no response is returned, repeat steps 3 and 4 with another
COM por t until “Farallon Communications, Inc. Netopia ISDN PC
Card” is returned.
5. Go to Chapter 3, “Windows Configuration Tool,” and continue from
there.