Step 2: connecting your equipment, U interface – Farallon Communications NetopiaTM User Manual

Page 8

Advertising
background image

8

Chapter 2

S

TEP

2: C

ONNECTING

YOUR

EQUIPMENT

Depending on the product you purchased, the Netopia ISDN PC Card
with U inter face or the Netopia ISDN PC Card with S/T inter face, the
appropriate equipment is provided. Your geographical location typically
dictates the ISDN inter face type to use. The following table
summarizes the inter face and equipment used by geographical region:

U I

NTERFACE

The U inter face is used in Nor th America where an external NT1 is
required to make an ISDN connection. Plug the RJ-45 cable into your
ISDN wall jack. Then connect the cable to the RJ-45 por t on the
U inter face connector.

Connecting the U inter face connector and RJ-45 cable

Region

Interface

Provided Equipment

Nor th America

U inter face

Integrated-NT1 (ISDN U inter face

connector) and RJ-45 to RJ-45
cable

Outside Nor th
America (except
Australia)

S/T inter face

ISDN S/T inter face connector and
RJ-45 to RJ-45 cable

Australia

S/T inter face

ISDN S/T inter face connector,

RJ-45 to RJ-45 cable, and
terminating resistor

Advertising